Conspit CPP-Evo Pedaler giver den faste, progressive pedalfornemmelse, du ikke vidste, du manglede—indtil nu. Designet med et 2. generations dual-stage hydrauliksystem og en seriøst finjusteret konstruktion, handler dette sæt om at give dine fødder den fornemmelse og kontrol, de ville have i en rigtig racerbils cockpit. Fra den bløde første bid til det stive sidste tryk er hver pedalbevægelse tilfredsstillende og gentagelig. Tilføj det M-DVF vibrationsfeedbackmodul, og du får et setup, der taler til dig med hver sving og bremsesone. Hvad adskiller Conspit CPP-Evo Pedaler fra andre? Differensieret Dual-Stage Bremsefornemmelse Det, der virkelig skiller sig ud, er bremsesystemet—det handler ikke kun om modstand. Pedalen går først gennem en blød elastomer og bliver derefter markant stivere, når både for- og bagkamre komprimeres sammen. Det er den slags fornemmelse, du typisk kun finder i høj-kvalitets race-forberedte biler. Racerkørere online siger konsekvent, at det er en af de nærmeste oplevelser, de har haft med threshold-bremsning i sim gear, uden at skulle opgradere til specialiserede motorsport-konverteringer. Hydraulisk Sensor, der opfanger alt Den 20MPa tryksensor er ikke kun der for at se godt ud. Den registrerer subtil pedalmodulering med fremragende konsistens gennem lange sessioner. Det betyder, at den ikke kun overlever udholdenhedsløb—den leverer omgang efter omgang uden udtoning eller støj i signalet. Brugere nævner ofte, hvor meget selvtillid den giver under trail-braking og i kraftige bremseszoner, hvor detalje og konsistens virkelig betyder noget. Mechanisk Justerbarhed Uden Besvær Du kan justere næsten alle aspekter af dette pedal-sæt, fra vinkel og højde til bid-punkter og fjeder preload. Og det er ikke den slags justerbarhed, der kræver en ingeniøruddannelse—justeringerne er enkle og godt markerede. Sammenlignet med andre pedaler med lignende tilpasning fremhæver racerkørere, hvor hurtigt de kunne finde et "sweet spot", der fungerede for deres kørestil. M-DVF Vibrationsmodul Gendanner Manglende Fornemmelse Det indbyggede vibrationssystem tilsluttes direkte til SimHub eller iRacings telemetri og leverer rumble-cues gennem pedalens krop, der simulerer overfladeændringer, ABS-pulser eller låste dæk. De fleste sæt i denne prisklasse udelader helt haptik eller kræver, at du køber tredjepartsmodifikationer. Her er det integreret, og det tilføjer et lag af sensorisk feedback, som racerkørere ikke vidste, de manglede—indtil de prøvede at køre uden det. Fordele og Ulemper Fordele Ulemper Dual-stage hydraulisk bremse giver distinkte pedal-faser Begrænset kompatibilitet uden for Windows PC Bred justerbarhed i pedalens følelse og geometri Opsætning kan kræve tuning for optimal ydeevne Integreret vibrationsfeedback understøtter SimHub og iRacing Holdbar CNC-bearbejdet aluminiumskonstruktion Specifikationer Specifikation Værdi Bremse System 2. generations dual-stage hydraulik Hydraulisk Sensor 20 MPa højpræcisionssensor Pedal Justerbarhed Vinkel, højde, afstand, fodstøtte, fjeder preload Bremse Justerbarhed For-/bag preload + 4 pedalkraft-niveauer Throttle Justerbarhed 4 pedalkraft-niveauer + rejse/preload Clutch Justerbarhed Fjeder preload + 4 bid-punkt niveauer Vibrationsmodul M-DVF, kompatibel med iRacing & SimHub Materialer CNC-bearbejdet 6061-T6 aluminium, sandblæst/anodiseret Forbindelse USB Platform Windows PC Conspit CPP-Evo Pedaler Kompatibilitet Komponent Kompatibel? Windows PC Ja SimHub Ja iRacing Native Feedback Ja Konsolplatforme (Xbox, PlayStation) Nej USB Pedal Interfaces Ja (direkte via USB) Conspit CPP-Evo Pedaler er bygget til Windows PC brugere og tilsluttes direkte via USB, hvilket holder opsætningen ren og latenstiden lav. Pedalerne understøtter SimHub og iRacings native vibrationsfeedback systemer gennem det indbyggede M-DVF modul, en fremragende funktion, der ikke er almindelig at finde i sæt til samme pris. Som en selvstændig USB-enhed, er de ikke afhængige af en base eller separat kontrolboks for at fungere. De understøtter ikke konsol systemer som PlayStation eller Xbox, og der er ingen kendte adaptere til at få dem til at fungere med disse platforme. Platform-mæssigt er dette sæt designet til PC sim racere, der kører titler som iRacing, Assetto Corsa, rFactor 2, RaceRoom og lignende PC-fokuserede sims. Pedalerne er afhængige af PC-native software og telemetri-integration, hvilket betyder, at de ikke vil fungere med konsolspil, selvom de er tilsluttet gennem en base, der understøtter dem. De hydrauliske og haptiske systemer kræver softwareinput, som kun er tilgængelig i PC-miljøer—så hvis du racer på en konsol, er dette ikke dit match.

Read more less

Conspit CPP-Lite pedaler leverer en seriøs kraft i et kompakt format. Bygget omkring en stiv T6 aluminiumlegeringsramme, kombinerer de præcisionsbearbejdning med smart teknologi for et setup, der ikke bare ser godt ud—det leverer også hver omgang. Den hydrauliske bremse med M‑DVF vibrationsfeedback giver bremsepedalen faktisk tekstur, ikke bare modstand. Og de kontaktløse Hall sensorer på gassen sikrer en silkeagtig inputkurve, der er lige så velegnet til at lette gennem sving som til at accelerere på langsiderne. Hvad adskiller Conspit CPP-Lite pedalerne fra andre? Glidende Gaskontrol med Ingen Slitage Hall effect sensorer er ikke nye, men den måde Conspit implementerer dem på her fortjener opmærksomhed. Gassen og koblingen bruger skjulte kontaktløse sensorer, så du undgår fysisk slitage. Det betyder konsekvent glatte input over tid og minimal signaldrift—især nyttigt når finjustering er nødvendig i traktionsbegrænsede forhold. Racerkørere elsker, hvor raffineret gaspedalen føles, især når de bruger trail-throttling ud af trange sving. Hydraulisk Bremse, der Føles Forudsigelig Mens mange pedal-sæt i denne prisklasse holder sig til load-celler, tilbyder CPP-Lites hydrauliske bremse en mærkbar forskel i følelse og linearitet. Den reagerer på tryk mere som et rigtigt bremsesystem, med en flydende respons i stedet for kun fjederkomprimering. Brugere siger konsekvent, at det leverer bedre pedalmodulering over lange sessioner, og at det er lettere at stole på under hård opbremsning end rent mekaniske systemer. Integreret Vibration Giver Nyttig Feedback Det indbyggede M‑DVF vibrationssystem er mere end en gimmick—det giver taktile signaler, som kørere ofte stoler på, men som ikke fås i sim setups. Uanset om det er ABS-triggering, låste dæk eller vejbelægning, hjælper det med at kompensere for manglen på fysisk sædeforstærkning i et statisk rig. Det synkroniseres direkte med SimHub og iRacing, hvilket gør det plug-and-play for de fleste racerkørere og en kæmpe bonus for træningskonsistens. iSpeed Software Gør Opsætning Intuitiv Den medfølgende software, udviklet med iSpeed Racing, giver detaljerede telemetri-oversigter, tilpassede gas- og bremsekurver og 0–100 km/h accelerationsmålinger. Det er et af de få sæt, hvor softwaren rent faktisk er nyttig i stedet for en byrde. Mange brugere fremhæver, hvor nemt det er at finjustere pedalens adfærd for forskellige biler uden at skulle dykke ned i ekstern software eller gætte sig til det. Fordele og Ulemper Fordele Ulemper Hydraulisk bremsesystem giver flydende pedalfeedback Ingen native support for konsoller Kontaktløse Hall sensorer forbedrer langsigtet nøjagtighed Ingen kobling med i standardversionen Indbygget vibration virker med SimHub og iRacing Softwaren tilbyder detaljeret tuning og telemetri værktøjer Specifikationer Specifikation Værdi Bremse System 2. generations dual-stage hydraulik Hydraulisk Sensor 20 MPa højpræcisionssensor Pedal Justerbarhed Vinkel, højde, afstand, fodstøtte, fjeder preload Bremse Justerbarhed For-/bag preload + 4 pedalkraft-niveauer Throttle Justerbarhed 4 pedalkraft-niveauer + rejse/preload Clutch Justerbarhed Fjeder preload + 4 bid-punkt niveauer Vibrationsmodul M-DVF, kompatibel med iRacing & SimHub Materialer CNC-bearbejdet 6061-T6 aluminium, sandblæst/anodiseret Forbindelse USB Platform Windows PC Conspit CPP-Lite Pedaler Kompatibilitet Komponent Kompatibel? Windows PC Ja iSpeed Racing Software Ja SimHub Ja iRacing Vibration Feedback Ja Konsolplatforme (PlayStation, Xbox) Nej USB Pedal Interfaces Ja (direkte via USB) Conspit CPP-Lite tilsluttes direkte via USB og er fuldt kompatibel med Windows PC opsætninger. Det understøtter SimHub og iRacing vibration feedback gennem det indbyggede M‑DVF system, hvilket giver en direkte forbindelse til telemetridata uden behov for eksterne motorer eller shakere. Det integreres problemfrit med iSpeed Racing softwaren, som tilbyder omfattende kontrol og tuning muligheder. Bygget er universelt designet, så det passer til næsten alle sim racing rigs, der understøtter pedalmonteringsplader—men bemærk, at en koblingspedal kan være valgfri afhængigt af konfigurationen. Platformmæssigt er dette sæt kun for PC-fokuserede sim racere. USB-interface virker med de fleste sim racing titler, herunder iRacing, Assetto Corsa, ACC og rFactor 2. Det understøtter ikke konsoller som Xbox eller PlayStation direkte, og der er ikke nogen konsol-kompatibel mode eller firmware løsninger tilgængelige. Hvis du kører et konsolbaseret rig, vil disse pedaler ikke kunne interagere uden en PC-baseret input hub eller brugerdefineret controllerkortlægning, som ikke er officielt understøttet.

Read more less

Current dispatch time: 5-7 business days!Cube Controls SP01 Core Pedals offer that rare blend of design purity and performance tuning that makes them feel like they were made for your feet and your rig. Built from CNC-machined aerospace aluminum and designed with obsessive attention to detail, the SP01 Core packs serious feel into a compact package. The adjustability is intuitive, the load cell is rock solid, and the smoothness of travel makes every modulated brake or throttle input feel calculated—because it is. What Sets the Cube Controls SP01 Core Pedals apart? Compact Design Without Compromise Some pedal sets go big and heavy to prove their strength—SP01 Core does the opposite. It’s lightweight and compact but structurally rigid where it counts, thanks to its single-block CNC aluminum chassis and FEM-optimized design. It doesn’t flex under pressure and doesn’t demand a full cockpit rebuild just to fit. Users love how easily it integrates into tight rigs without giving up performance or modularity. Tool-Free Adjustments That Actually Work The SP01 Core gives you direct, easy access to spring preload and pedal throw without diving into a toolbox. A dedicated knob on the throttle and clearly marked adjustments on the brake and pedal plates let you dial in your feel with minimal downtime. Feedback from users highlights how fast they can switch between GT, Formula, or Rally setups with confidence and without frustration. Pedal Feel That Reflects Load and Motion Naturally This set uses a 200kg load cell with an improved kinematic design that transmits pressure directly to the sensor. That’s more than just numbers—it translates to a smooth, progressive braking feel that doesn’t spike or fade. Combine that with the redesigned main spring and dampers, and you get a pedal stroke that feels planted but never dull. It responds like something twice its weight, but with better balance. Upgradeable Through Performance Kit Compatibility Unlike many entry-level sets that lock you into the stock feel, the SP01 Core is compatible with Cube Controls’ existing performance kit. That means swappable elastomers, additional damper options, and custom springs—opening up tuning for different disciplines or sim titles. Racers who've already invested in the upgrade path appreciate how it scales with them, rather than needing to be replaced once they level up their gear. Pros and Cons Pros Cons Compact and lightweight but structurally rigid No clutch pedal in the Core version Easy tool-free adjustment of pedal throw and preload Performance kit sold separately 200kg load cell with smooth pressure response Upgradeable with Cube Controls performance components Specifications Specification Value Construction CNC-machined aerospace aluminum Throttle Sensor 16-bit hall sensor Brake Sensor 200 kg load cell Adjustability Preload, pedal throw, spring/damper swaps Pedal Travel Adjustable via shaft knob (throttle) Resolution 16-bit Connectivity USB-C Dimensions 41.5 × 34 × 16.5 cm Weight 4.5 kg Included Accessories Not specified Cube Controls SP01 Core Pedals Compatibility Component Compatible? PC (Windows) Yes USB-C Direct Connection Yes Cube Controls Performance Kit Yes External Control Boxes Not required Console Platforms (PlayStation, Xbox) No The Cube Controls SP01 Core Pedals connect directly via USB-C and are fully compatible with PC-based sim racing setups. They do not require an external control box, making cable management cleaner and setup easier, especially for compact rigs. The pedals integrate smoothly with sim platforms such as iRacing, Assetto Corsa, ACC, and rFactor 2. For users looking to expand, the pedals are compatible with Cube Controls’ performance upgrade kit, allowing for long-term tuning flexibility. As with most gear in this class, the SP01 Core is not compatible with PlayStation or Xbox consoles and has no console-specific firmware or compatibility layers. These pedals are designed for PC sim racers looking to get serious with a modular, scalable setup that performs well out of the box and continues to grow with additional tuning. If you’re building a dedicated PC rig, they slot right in and deliver strong results from day one.

Read more less

Moza CRP2 Pedaler bringer en dristig kombination af håndværk og tilpasningsmuligheder til sim racing-opsætninger. Disse pedaler er bygget i aluminium af luftfartskvalitet og forstærket med en robust hælplade i kulfiber, og de er konstrueret til at holde under pres. Med en 200 kg load cell-sensor til præcis bremsekontrol og over 1.700 tilpasningsmuligheder er dette pedalsæt lige så alsidigt, som det er holdbart. Uanset om du finjusterer gasresponsen eller justerer bremsefølelsen, leverer Moza CRP2 en raceroplevelse, du kan tilpasse til din kørestil. Hvad adskiller Moza CRP2 Pedaler? Tilpasningsbar bremsepedalfølelse CRP2 giver brugerne mulighed for at udskifte gummiblokke med forskellige hårdhedsniveauer og konfigurere dæmpersystemet. Med op til 125 kombinationer af bremsefølelse kan racerkørere efterligne opførslen fra biler lige fra rallykøretøjer til Formula 3-maskiner, hvilket giver en skræddersyet oplevelse til enhver kørestil. Holdbare materialer i høj kvalitet Konstrueret i aluminium af luftfartskvalitet og med en hælplade i kulfiber modstår CRP2-pedalerne slid selv under langvarig brug. Denne satsning på robuste materialer sikrer lang levetid og stabilitet, især under højintensive racersessioner. Problemfri justerbarhed Justerbare pedalvinkler, afstande og vandring sikrer, at disse pedaler kan tilpasses forskellige opsætninger og ergonomiske præferencer. Uanset om du foretrækker et traditionelt layout eller noget mere kompakt, tilpasser CRP2 sig uden problemer. Udskiftning af fjedre og dæmpere uden værktøj Udskiftning af fjedre og dæmpere er ubesværet med CRP2’s design, hvilket gør det muligt for racerkørere at justere pedalmodstanden undervejs uden at afbryde en session. Denne funktion sparer tid og giver ekstra bekvemmelighed for dem, der ofte justerer deres opsætning. Fordele og ulemper Fordele Ulemper Meget tilpasningsbar bremsefølelse med flere muligheder. Valgfri koblingspedal sælges separat. Holdbare materialer som aluminium og kulfiber. Begrænset konsolkompatibilitet via ESX-rattet alene. Justeringer uden værktøj til hurtige ændringer af opsætningen. Højere prisniveau end nogle konkurrenter. Justerbare vinkler, vandring og pedalafstand. Specifikationer Specifikation Værdi Materiale Aluminiumslegering af luftfartskvalitet Load Cell-kraft 200 kg Dimensioner 364mm x 415.1mm x 256.5mm Vægt 7.5 kg Forbindelse USB Platformskompatibilitet PC (Windows) og Xbox (med ESX-rat) Justerbarhed Pedalvinkel, afstand og vandring Valgfrit tilbehør Koblingspedal, performance kits Moza CRP2 Pedaler kompatibilitet Moza CRP2 Pedaler er meget kompatible inden for Moza-økosystemet, især når de kombineres med ESX steering wheel for Xbox-understøttelse. De integreres også problemfrit med Mozas direct-drive-baser og sikrer dermed en sammenhængende opsætning. Disse pedaler understøtter dog ikke andre konsoller som PlayStation eller generiske tredjepartsrat, hvilket begrænser fleksibiliteten på tværs af mærker. Dette gør dem ideelle til sim racers, der er dedikerede til Mozas økosystem, eller PC-brugere, som har brug for premium pedalstyring. Til gamingplatforme forbindes CRP2-pedalerne via USB og er designet til PC (Windows 10 og nyere). Med ESX-rattet udvider de funktionaliteten til Xbox-konsoller, men de mangler kompatibilitet med macOS- og Linux-systemer. Understøttede spil inkluderer titler som iRacing, Assetto Corsa og F1, hvilket giver problemfri integration til seriøse sim racers.

Read more less

Moza mBooster Active Pedal redefinerer sim racing-kontrol ved at integrere force feedback direkte i pedalsystemet. De dobbelt 200KG tryksensorer registrerer bremsekraft med ekstrem præcision og tilbyder et bredt kontrolområde fra let feathering til hård threshold braking. Det justerbare force feedback-system leverer haptiske signaler for ABS-aktivering, gearskift og tab af vejgreb, hvilket tilføjer endnu et lag af realisme til hver omgang. Med softwaredrevet tilpasning, et højpræcisions sensorsystem og en ergonomisk fodplade er denne pedal bygget til racerkørere, der kræver kontrol ud over blot inputfølsomhed. Hvad adskiller Moza mBooster Active Pedal? Force Feedback Du Kan Mærke I modsætning til passive pedalsystemer integrerer dette motorstyret force feedback direkte i bremse- og gaskontrol. Uanset om det er ABS-aktivering, tab af vejgreb eller endda påvirkninger fra gearskift, giver feedbacksystemet realtids-signaler for at holde dine inputs præcise og responsive. Præcisionssensorer til Konsistent Opbremsning Udstyret med dobbelte 200KG tryksensorer og en 15-bit vinkelsensor registrerer denne pedal bremsekraft med ekstrem præcision. Ingen dødzoner, ingen mekanisk slitage — blot pålideligt input, der forbliver konsistent over tid, uanset om du finjusterer et bremsepunkt eller hamrer pedalen i bund for at undgå en kollision. Fuldt Tilpasselig med Moza Pit House Software Softwarebaserede justeringer giver dig mulighed for at ændre kraftkurver, feedbackintensitet og inputadfærd uden at skulle udskifte fysiske komponenter. One-click tuning gør det nemt at skifte mellem road car-, GT- eller open-wheel-opsætninger på få sekunder. Modulært Design med Flere Opsætningsmuligheder Denne pedal integreres problemfrit med Mozas CRP2 pedal-sæt og giver brugerne mulighed for at udvide deres setup med ekstra inputmuligheder. Uanset om den bruges som gas, bremse eller kobling, tilpasser den sig forskellige racingdiscipliner med minimal konfigurationsindsats. Fordele og Ulemper Fordele Ulemper Force feedback-system simulerer ABS og tab af vejgreb Kræver ekstern strøm til force feedback Dobbelt tryksensorer for konsistent bremseinput Kun PC, ingen konsolunderstøttelse Softwarejusteringer med ét klik til tuning af pedalfornemmelse Modulær kompatibilitet med Moza CRP2 pedaler Specifikationer Specifikation Værdi Pedaltype Gas, Bremse eller Kobling Force Feedback Motoriseret, telemetribaseret feedback Tryksensorer Dobbelt 200KG sensorer Maksimal Registreret Kraft 400KG Vinkelsensor 15-bit højpræcision Kabinetmateriale Komposit Fodpladedesign Biomimetisk buet overflade Støjniveau 44dB Software Moza Pit House Kompatibilitet PC Modulær Kompatibilitet Moza CRP2 Pedals Moza mBooster Active Pedal Kompatibilitet Kompatibel Med Ikke Kompatibel Med Moza Pit House software til tilpasning Konsolplatforme Moza CRP2 pedal-sæt Tredjeparts pedal-sæt Direkte PC-forbindelse MacOS Designet eksklusivt til PC-racing setups integreres mBooster direkte med Moza Pit House software, hvilket muliggør softwaredrevet pedaltilpasning og telemetribaserede force feedback-justeringer. Den fungerer sammen med Moza CRP2 pedal-sættet, hvilket gør det nemt at konfigurere som bremse, gas eller kobling afhængigt af brugerens præference. Kun PC-kompatibilitet sikrer problemfri drift med Assetto Corsa, iRacing, rFactor 2 og Automobilista 2. Konsolbrugere skal dog undersøge alternative løsninger, da dette system ikke understøtter Xbox- eller PlayStation-hardware.

Read more less

The Moza SR-P Pedals offer a solid, precise feel that sim racers crave, constructed from high-strength steel to endure intense racing sessions. Whether you're a two-pedal or three-pedal driver, these pedals deliver exceptional control, thanks to features like the 100KG load cell brake sensor and an adjustable pedal surface height. The organ-type throttle pedal design ensures your foot follows a natural trajectory, making every throttle input smooth and predictable. It’s the kind of setup that gives you confidence to push harder lap after lap. What sets the Moza SR-P Pedals apart? Load Cell Braking Power A 100KG capacity load cell brake sensor elevates the Moza SR-P pedals above others in its class. This provides detailed feedback for fine-tuning braking force, giving you full control over how much pressure to apply—without worrying about squishy or inconsistent pedal feel that some cheaper alternatives suffer from. Dual Sensor Fusion Technology The combination of angle and pressure sensors for braking creates a smooth and highly controlled deceleration experience. The angle sensor governs early-stage braking, while the pressure sensor kicks in for harder braking at the end of travel. This dual-stage feedback system offers a more intuitive and layered brake response. Highly Adjustable Design Unlike some pedals that lock you into a fixed setup, the Moza SR-P pedals offer customizable pedal spacing and height adjustment. Whether you prefer pedals close together or spaced further apart for comfort, the SR-P pedals let you tailor them to your rig and driving style without compromise. Magnetic Encoder Precision Forget about the wear and tear of Hall sensors. These pedals use a 16-bit magnetic encoder with 65,536 PPR resolution. This means super accurate input readings across all three pedals, providing an ultra-smooth and linear feel that’s perfect for competitive racing. Pros and Cons Pros Cons Strong build quality with high-strength steel construction. No direct compatibility with consoles like PlayStation or Xbox. Load cell brake with up to 100KG pressure sensitivity. Limited to USB for PC connection, no wireless option. Highly adjustable pedal height and spacing for comfort. Specifications Specification Value Weight 10.3 kg Dimensions 54.6 cm x 46.4 cm x 21.2 cm Material High-strength steel / CNC Aluminum Alloy Max Range of Pressure Sensor 100KG Sensor Type (Brake) Pressure + Angle Sensor Sensor Type (Throttle & Clutch) Angle Sensor Encoder Resolution 16-bit (65536 PPR) Pedal Spacing Adjustable Pedal Surface Height Adjustable Pedal Connection Port USB Moza SR-P Pedals The Moza SR-P Pedals are designed for versatility, making them compatible with a wide range of setups. You can connect them directly to your PC via USB, ensuring a seamless integration with most sim racing rigs. The adjustable pedal spacing and height allow them to fit into both compact and more spacious cockpits. However, these pedals are designed with PC use in mind, so if you're a console racer, you may need to consider other options or additional hardware adapters. In terms of compatibility with games, the SR-P pedals work smoothly with major PC sim titles like iRacing, Assetto Corsa, and rFactor 2. Unfortunately, they are not natively compatible with consoles like PlayStation or Xbox, limiting their use to PC platforms only. For those in the sim racing community who focus on PC gaming, these pedals integrate flawlessly with a wide range of racing software.

Read more less

Moza SRP2 Loadcell Pedaler føles, som om de er bygget til piloter, der går op i kontrolinput ned til den mindste bevægelse. Det mest fremtrædende er 100KG load cell-bremsen, som leverer fast, trykbaseret input, der fremmer konsekvent muskelhukommelse, kombineret med et meget tilpasningsdygtigt bremsesystem, der tilbyder dusinvis af konfigurationer direkte fra start—og langt flere med det valgfrie kit. Under fødderne føles aluminiumskonstruktionen solid og stabil, mens den glatte, stille bevægelse giver hvert tryk en ren og kontrolleret karakter, der belønner præcise input. Hvad adskiller Moza SRP2 Loadcell Pedaler? Dyb bremsetilpasning uden kompleksitet – Mange pedalsæt tilbyder justeringsmuligheder, men SRP2 skiller sig ud ved, hvor tilgængeligt det føles. Brugere nævner ofte, at de hurtigt kan skifte elastomerer og fjedre uden at skulle igennem komplicerede opsætninger. Med 25 konfigurationer fra start og mange flere med performance-kittet bliver det nemt at tilpasse bremsefølelsen til forskellige fly eller flyvestile uden at forstyrre dit workflow. Sensorkombination for konsistent input – Kombinationen af en 100KG load cell og en 15-bit vinkelsensor skaber en lagdelt inputfølelse, som piloter værdsætter. I stedet for udelukkende at basere sig på kraft eller bevægelse registrerer systemet begge dele, hvilket giver en mere jævn modulering under opbremsning eller taxi-kontrol. Denne dobbelte tilgang hjælper med at opretholde konsistens i gentagne input, hvilket især er nyttigt under længere sessioner. Stille og jævn mekanisk bevægelse – Feedback fra brugere fremhæver ofte, hvor raffineret pedalbevægelsen føles. Den lukkede sleeve-konstruktion og polerede aksler reducerer friktion og støj, hvilket resulterer i en glidende tryk- og returbevægelse. Dette er især mærkbart i stille omgivelser, hvor mekanisk støj ellers kan forstyrre koncentrationen. Designet til både skrivebord og rig – SRP2 er ikke begrænset til én opsætningsstil. Dens geometri fungerer godt for skrivebordsbrugere, mens valgfrie vægbeslag hjælper med at holde alt stabilt under tryk. Denne fleksibilitet gør den velegnet til både kompakte setups og mere permanente installationer uden at tvinge brugeren til en bestemt monteringsløsning. Fordele og Ulemper Pros Cons 100KG load cell leverer konsekvent bremsetryk Performance-kit kræves for fuldt tilpasningsområde Bredt udvalg af justerbare bremseindstillinger Kan kræve stabil montering for optimal oplevelse Jævn og støjsvag pedalbetjening Justerbar vinkel, afstand og pedalhøjde Specifikationer Specification Value Brake Sensor 100KG load cell Angle Sensor 15-bit high-precision angle sensor Brake Adjustment 25 configurations (over 1,000 with optional kit) Pedal Angle Adjustment Up to 25° Pedal Spacing Adjustment ±15mm left/right Pedal Height Adjustment 36mm range Construction Material Aerospace-grade aluminum and high-strength steel Throttle/Clutch Adjustment Two-level preload adjustment Operation Smooth, low-noise enclosed sleeve structure Software MOZA Pit House Durability Tested for over 1 million presses Moza SRP2 Loadcell Pedaler Kompatibilitet SRP2 pedalerne er designet til nem integration i moderne sim setups. De er kompatible med PC via direkte USB-forbindelse og kan også bruges med Xbox-systemer, når de parres med MOZA ESX rat. Dette gør dem fleksible nok til at fungere både som et selvstændigt pedalsæt og som en del af et større økosystem. De er ikke designet til direkte tilslutning til konsoller uden en kompatibel wheelbase eller adapter. På hardware-siden understøtter pedalerne både skrivebordsopsætninger og monterede rigs, hvor valgfrie vægbeslag forbedrer stabiliteten under hård opbremsning. Den justerbare geometri gør det muligt at tilpasse dem til en bred vifte af siddepositioner, hvilket gør dem velegnede til både afslappede setups og mere permanente installationer. Integration med MOZA Pit House software giver fuld kontrol over pedal-kurver og inputadfærd. Med hensyn til software og platformunderstøttelse er pedalerne fuldt kompatible med PC-baserede simulationsspil, herunder større racing- og simulationssoftware, der understøtter USB-inputenheder. De er ikke nativt kompatible med PlayStation-systemer, og brug på konsol afhænger af kompatibel MOZA-hardware.

Read more less

The Simagic P1000 Pedals are designed to give sim racers serious control over their setup. Built with an all-aluminum alloy structure, these pedals feature both a loadcell sensor and optional hydraulic system for ultimate accuracy. Whether you're looking for long pedal travel for road cars or short, responsive inputs for race cars, the Simagic P1000 Pedals adapt with adjustable stroke, spacing, and force. With over 27,000 customization options, the P1000 is all about tuning your setup to match your driving style with absolute precision. What sets the Simagic P1000 Pedals apart? Unparalleled Customization The modular design of the Simagic P1000 allows for 27,648 possible configurations, including adjustable pedal stroke, height, and resistance. Whether you prefer road cars or racing simulations, this flexibility ensures that you can dial in exactly the feel you're after. Users love how much fine-tuning is possible, even for minor adjustments. Loadcell and Hall Angle Sensors The P1000 offers both loadcell and Hall angle sensors, allowing you to switch between setups depending on your driving style. This dual-sensor capability is a standout feature, especially for those who switch between simulations and need the accuracy of a loadcell for race cars or the smoothness of Hall sensors for road cars. Optional Hydraulic System The optional P-HYS hydraulic system provides a more realistic brake feel, emulating the damping and rebound you’d experience in real cars. This adds another layer of depth to your pedal feel, especially for braking accuracy. The modularity means you can add it later, making these pedals future-proof for upgrades. Durable CNC Aluminum Build Constructed from CNC aluminum, these pedals are designed to last through over 200,000 presses without flaw. This durability, combined with the solid, sturdy design, ensures that the pedals can withstand heavy, competitive use. Feedback from users confirms their reliability, even under intense conditions. Pros and Cons Pros Cons Highly customizable with 27,000+ configuration options. Hydraulic system is an additional purchase. Loadcell and Hall sensors switchable for different setups. Initial setup may be complex for beginners. Durable all-aluminum CNC construction. Optional haptic feedback for extra immersion. Specifications Specification Value Frame Material CNC Aluminum Alloy Pedal Sensors Loadcell (100kg) & Hall Angle Sensors Resolution 12-bit (4096) Adjustable Features Travel, Spring Force, Spacing, Height, Stroke, Angle Optional Add-ons Hydraulic System, Haptic Feedback, Rubber Pads Pedal Plates Anodized Aluminum Alloy Dimensions 348 x 489.8 x 368.5mm Weight 7.6kg Connection USB (PC), Simagic Wheelbase (Can-Bus) Simagic P1000 Pedals Compatibility The Simagic P1000 Pedals connect easily via USB, making them highly compatible with PC-based racing simulators such as iRacing, Assetto Corsa, and rFactor 2. They can also be integrated with Simagic wheelbases using the CAN-Bus port. However, these pedals are not compatible with consoles like PlayStation or Xbox, making them more suited for PC setups. The modular design means they fit easily into most racing cockpits and sim rigs, as long as the proper mounting options are available. When it comes to gaming platforms, the P1000 pedals are fully compatible with PC gaming systems and work flawlessly with a variety of racing titles that support high-end hardware. While they shine on Windows-based systems, they won’t work on gaming consoles, limiting their use to sim racers who focus on PC-based simulations. With the loadcell sensor and optional hydraulic system, they offer an incredibly responsive experience for games that prioritize brake accuracy and force feedback.

Read more less

The Simagic P1000i Inverted Pedals deliver a pedal experience crafted for serious sim racers, engineered for those who want a more natural car feel. Designed for drift and precision braking, the P1000i combines CNC-machined aluminum and 100kg load cell with multiple customization options, so you can fine-tune every detail from angle to compression strength. Its unique design eliminates complex installation, and paired with Simagic’s SimPro Manager, it lets you create an impressively tailored setup without losing a moment of racing. What sets the Simagic P1000i Inverted Pedals apart? Modular, Adjustable Brake System The P1000i's brake system allows for deep customization, from stroke length to compressive strength. Users enjoy that it can adapt to different driving styles by swapping between eight rubber pads, enabling one of the most personalized braking experiences available in sim racing setups. Inverted Design for Realistic Feel Unlike most setups, these pedals feature an inverted design to simulate the feel of a real vehicle, particularly appreciated by drift enthusiasts. This setup provides a sensation of weight distribution more commonly found in road cars, making it an exciting pick for sim racers who crave that real-world driving sensation. Customizable Pedal Position and Angle The P1000i allows racers to adjust each pedal’s angle, stroke length, and even lateral positioning. For racers with specific ergonomic needs, this customization means dialing in precise configurations that fit their natural posture and foot positioning, enhancing control over long sessions. Versatile Sensor Options With a choice of load cell sensor or Hall angle sensor, racers can switch depending on the type of driving they plan to focus on. The load cell is ideal for those looking for braking strength, while the Hall angle sensor is beneficial for precision inputs, so each setup is highly adaptable. Pros and Cons Pros Cons Highly adjustable brake and pedal settings. Inverted design requires specific mounting space. Multiple sensors for customized pedal response. Not compatible with consoles without the Sigma Cortex Durable CNC-machined aluminum construction. Silent bearing structure on clutch pedal. Specifications Specification Value Product Type Inverted Pedal System Frame Material CNC-Machined Aluminum Alloy Brake Load Cell 100kg Brake Stroke Adjustment Yes Brake Compressive Strength Adjustment Yes Pedal Angle Adjustment Yes Lateral Pedal Position Adjustment Yes Pedal Configuration Options 27,648 Foot Pedal Material Anodized Aluminum Alloy Included Springs 3 for Clutch Silent Bearing Structure Included Simagic P1000i Inverted Pedals Compatibility The Simagic P1000i Inverted Pedals integrate best with Simagic wheelbases and setups, giving full functionality with the SimPro Manager software for seamless adjustment. These pedals connect directly via USB to a PC, allowing for a straightforward installation and ensuring compatibility with leading sim setups that support USB peripherals. However, these pedals are limited in compatibility with consoles, focusing solely on a PC experience, which is ideal for sim racing enthusiasts aiming for a tailored PC setup. When it comes to game compatibility, the P1000i pedals work with a wide array of PC racing titles, including Assetto Corsa, iRacing, and rFactor 2, bringing adjustable pedal sensitivity and customization to the forefront of these gaming platforms. While not compatible with consoles without the Sigma Cortex, these pedals ensure a consistent, professional connection and performance for most leading PC racing sims.

Read more less

The Simagic P1000i-RS Hydraulic Inverted Pedals offer an incredibly refined design for sim racers, focusing on modularity and advanced hydraulics. Built with a CNC-machined aluminum frame, the P1000i-RS pairs robust durability with the adaptability sim racers crave. It’s equipped with a P-HYS hydraulic brake system and the optional P-HPR Haptic Pedal Reactor for an authentic vehicle feedback experience, while easy angle, travel, and strength adjustments allow a personalized setup tailored to the racer's needs—all within a sleek, inverted pedal package. What sets the Simagic P1000i-RS Hydraulic Inverted Pedals apart? Hydraulic Brake System with Adjustable Damping The P-HYS hydraulic brake system delivers fluid resistance that closely mimics real-world braking, providing a more natural deceleration feel. Combined with adjustable damping and rebound, this pedal set offers a level of control not found in simpler mechanical setups, enhancing the simulation experience for dedicated sim racers. Optional Haptic Feedback Motor The P1000i-RS offers the unique option of the P-HPR Haptic Pedal Reactor, a feature that adds tactile feedback tuned to in-game telemetry. This gives drivers a more tactile connection with the virtual road, enabling adjustments to vibration frequency and amplitude that simulate vehicle dynamics, making for a highly engaging experience. Quick Installation and Modular Adjustability These pedals come with a modular installation plate and wiring box that simplify mounting and profile setup, a convenience not typically seen in comparable pedal systems. With the pedal angle, travel, and even lateral spacing all customizable, it’s easy to adjust for comfort and fit, enhancing both performance and ease of use. Durable CNC Aluminum Construction The all-aluminum structure, meticulously crafted through CNC machining, has been tested to withstand over 200,000 stomps without structural issues. This robust construction ensures the pedals hold up under high-use conditions, making them a favorite for racers looking for a setup that lasts. Pros and Cons Pros Cons Hydraulic brake system with adjustable damping. Not console compatible. Optional haptic feedback for immersive experience. Relatively high price for the set. Modular, simplified installation process. May require additional mounting hardware. Durable aluminum construction for longevity. Heavy unit, may need solid rig setup. Specifications Specification Value Model Simagic P1000i-RS Hydraulic Inverted Pedals Package Dimensions 35.00cm x 50.00cm x 38.00cm Weight 7.60kg Resolution 12Bits (4096) USB Connection PC, Simagic Wheelbase (Can-Bus Port) Hydraulic Brake Cylinder Included Haptic Pedal Reactor Supported (optional) Adjustable Travel Supported Adjustable Spring Force Level Supported Angle/Position Adjustment Supported Pedal Plates Anodized Aluminum Alloy Pedal Control Box Included Building Material CNC Aluminum Alloy Dimensions 348 x 489.8 x 368.5mm Simagic P1000i-RS Hydraulic Inverted Pedals Compatibility The Simagic P1000i-RS Hydraulic Inverted Pedals are fully compatible with PC setups, connecting directly via USB or through the Simagic wheelbase. These pedals also pair well with Simagic’s own line of wheelbases and mounts, ensuring ease of integration for those using Simagic gear. Notably, this pedal system is designed with PC platforms in mind, meaning it does not support console setups, focusing instead on the flexibility that PC gaming offers. In terms of gaming titles, these pedals perform exceptionally well with popular PC racing sims like Assetto Corsa, iRacing, and rFactor 2. With Simagic's software allowing for adjustments to brake force, pedal travel, and telemetry-based haptics, they are tuned to enhance each game’s feedback. Console users may be disappointed by the lack of compatibility, as these pedals are specifically built with the PC sim racer in mind.

Read more less

The Simagic P2000-S100 Pedals are designed for sim racers who want the feel of hydraulic power at their feet. Constructed from CNC machined aluminum, this pedal set integrates a load cell sensor and custom hydraulic brake system rated up to 200 kg, putting real muscle into braking. With fine-tuning options on pedal angle, position, and even clutch friction, the P2000-S100 offers control over every detail, giving serious racers a setup that pushes driving consistency to a whole new level. What sets the Simagic P2000-S100 Pedals apart? Custom Hydraulic Brake System Equipped with a fully hydraulic brake, the P2000-S100 mirrors real car brake resistance, pushing up to 200 kg with customizable stiffness. This brake design, alongside a load cell sensor, gives racers powerful, reliable braking feedback, ideal for those demanding accuracy and feel under braking pressure. Durable CNC Machined Aluminum Build Every component on the P2000-S100 is CNC machined from aluminum, giving it a rugged construction that sim racers often seek for durability. This design not only withstands heavy use but also minimizes flexing, allowing for more consistent pedal feedback over time—a huge plus for competitive racers. Extensive Adjustment and Customization Options Adjustability is key with the P2000-S100, which offers pedal height, angle, and stiffness adjustments for a custom setup that suits any racer’s preference. The clutch system’s Belleville spring stack simulates a clutch friction point, adding an additional layer of realism often missing from pedal systems. Plug-and-Play USB Compatibility No complex setups here—the P2000-S100 is ready to go right out of the box with simple USB plug-and-play functionality, which works seamlessly with Simagic’s configuration software. It’s made with PC users in mind, eliminating compatibility issues and making setup straightforward for any PC-based sim racer. Pros and Cons Pros Cons Hydraulic brake with customizable stiffness. May require additional mounting hardware. Durable CNC machined aluminum construction. Heavy unit, requires stable mounting. Adjustable clutch friction point simulation. Plug-and-play setup with Simagic software. Specifications Specification Value Model Simagic P2000-S100 3 Pedals Package Dimensions 47.00cm x 40.00cm x 20.00cm Weight 9.00kg Hydraulic System Hydraulic brake with adjustable clutch Brake Pressure 200 kg (adjustable) Pedal Position/Angle Adjustment Supported Material CNC machined aluminum Connection Type USB, plug-and-play Load Cell 100 kg (200 kg optional) Included Accessories Hard/soft spring kit, base plate Platform Compatibility PC only Simagic P2000-S100 Pedals Compatibility The Simagic P2000-S100 Pedals are fully compatible with PC platforms via USB and are designed specifically for PC-based sim racing setups. These pedals plug and play easily with Simagic’s configuration software, allowing for a straightforward connection. While ideal for those using PC-based rigs, the P2000-S100 does not support console setups, which keeps it focused solely on the PC sim racing community. For in-game compatibility, these pedals are versatile across popular PC racing titles like Assetto Corsa Competizione, iRacing, and rFactor 2. With Simagic’s software, racers can adjust force levels, brake pressure, and even clutch friction points. Console racers, however, may be disappointed as these pedals are crafted with PC racers in mind, leaving consoles unsupported.

Read more less

The Simagic P2000-S100RF Pedals bring a focused two-pedal setup that packs serious technology and tactile feedback. Built with CNC machined aluminum and incorporating a hydraulic master and slave cylinder, these pedals offer a unique edge with a load cell rated to 100 kg, upgradeable to 200 kg for even more control. With adjustability in position and angle, and an exceptionally durable build, the P2000-S100RF pedals give drivers a braking experience designed to perform lap after lap without losing their edge. What sets the Simagic P2000-S100RF Pedals apart? Hydraulic Brake System with High Load Capacity The hydraulic brake setup on the P2000-S100RF provides a brake force adjustable up to 200 kg, replicating high-force braking systems seen in racing setups. This setup supports racers who want fine-tuned control under pressure and need a brake pedal that can meet the demands of intense sim sessions. Rigidity of CNC Machined Aluminum Construction Designed from CNC machined aluminum, the P2000-S100RF pedals boast structural stability that stands up to heavy footwork and doesn’t flex under pressure. This rigid construction means drivers get a consistent feedback feel that holds up over extended use—essential for racers focusing on performance consistency. Load Cell for Precise Input The load cell integrated into these pedals offers fine-grain braking control, letting drivers make micro-adjustments that reflect instantly in their simulator. This type of sensor setup provides more nuanced braking feedback, helping racers shave down times with a setup that rewards controlled, precise input. Plug-and-Play USB Setup No complicated configuration here—the P2000-S100RF pedals are ready to go right out of the box with straightforward USB connectivity. With a setup built for the Simagic software suite, these pedals eliminate the usual driver complications and allow for hassle-free, configurable sim racing. Pros and Cons Pros Cons Durable CNC aluminum construction. Not compatible with console setups without the Sigma Cortex Adjustable brake load up to 200 kg. Higher-end price point. Plug-and-play USB connection. No dedicated clutch pedal. Includes base plate for stability. Specifications Specification Value Model Simagic P2000-S100RF 2 Pedals Package Dimensions 47.00cm x 40.00cm x 20.00cm Weight 7.00kg Brake Pressure 200 kg (adjustable) Load Cell 100 kg (200 kg optional) Material CNC machined aluminum Connection Type USB, plug-and-play Base Plate Included Platform Compatibility PC only Simagic P2000-S100RF Pedals Compatibility The Simagic P2000-S100RF Pedals are designed specifically for PC platforms and connect via USB, offering straightforward plug-and-play capability. With USB functionality and Simagic’s configuration software, these pedals are ready to work with most PC-based sim racing rigs right out of the box. However, the P2000-S100RF lacks compatibility with console systems, as it’s focused solely on providing an optimized experience for PC racers. In terms of in-game compatibility, these pedals are ideal for widely-used PC sim titles like Assetto Corsa Competizione, iRacing, and rFactor 2. Integrated with Simagic’s software, drivers have access to easy-to-use adjustment options for force and load levels. Gamers who primarily race on consoles, however, will find these pedals unsupported on console games, keeping the P2000-S100RF focused solely on PC-based racing setups. With the Sigma Cortex you can convert the pedals to PS5.

Read more less