Conspit CPP-Evo Pedals bring that firm, progressive pedal feel you didn’t realize you were missing—until now. Designed with a 2nd Generation Dual-Stage Hydraulic System and a seriously dialed-in construction, this set is about giving your feet the feel and control they’d have in a proper race car. From the soft initial bite to the stiff final press, each stroke is satisfying and repeatable. Add in the M-DVF vibration feedback module, and you’ve got a setup that talks to you with every corner and braking zone. What Sets the Conspit CPP-Evo Pedals apart? Differentiated Dual-Stage Brake Feel What really stands out is the braking system—this isn’t just about resistance. The pedal transitions through a soft elastomer at first, then stiffens dramatically as both front and rear chambers compress together. It's the sort of feeling you typically only find in high-end race-prep cars. Racers online consistently say it's one of the closest experiences to threshold braking they've found in sim gear without moving up to custom motorsport conversions. Hydraulic Sensor That Picks Up Everything The 20MPa pressure sensor isn’t just there for show. It registers subtle pedal modulation with excellent consistency across long sessions. That means it doesn’t just survive endurance runs—it delivers lap after lap without fade or noise in the signal. Users often mention how much confidence it gives them under trail braking and heavy braking zones where detail and consistency really count. Mechanical Adjustability Without the Headache You can tweak nearly every aspect of this pedal set, from angle and height to bite points and spring preload. And it’s not the kind of adjustability that takes an engineering degree either—adjustments are simple and well-marked. Compared to other pedals with similar customization, racers highlight how quickly they were able to find a “sweet spot” that worked for their driving style. M-DVF Vibration Module Brings Back Missing Sensation The built-in vibration system plugs directly into SimHub or iRacing’s telemetry, delivering rumble cues through the pedal body that simulate surface changes, ABS pulses, or locking tires. Most sets in this price range skip haptics entirely or need you to buy third-party mods. Here, it’s integrated, and it adds a layer of sensory feedback that racers didn’t realize they were missing—until they try driving without it. Pros and Cons Pros Cons Dual-stage hydraulic brake offers distinct pedal phases Limited compatibility outside Windows PC Wide adjustability in pedal feel and geometry Setup may require tuning for optimal performance Integrated vibration feedback supports SimHub and iRacing Durable CNC-machined aluminum construction Specifications Specification Value Brake System 2nd Generation Dual-Stage Hydraulic Hydraulic Sensor 20 MPa high-precision sensor Pedal Adjustability Angle, height, spacing, footrest, spring preload Brake Adjustability Front/rear preload + 4 pedal force levels Throttle Adjustability 4 pedal force levels + travel/preload Clutch Adjustability Spring preload + 4 bite point levels Vibration Module M-DVF, compatible with iRacing & SimHub Materials CNC-machined 6061-T6 aluminum, sandblasted/anodized Connection USB Platform Windows PC Conspit CPP-Evo Pedals Compatibility Component Compatible? Windows PC Yes SimHub Yes iRacing Native Feedback Yes Console Platforms (Xbox, PlayStation) No USB Pedal Interfaces Yes (direct via USB) The Conspit CPP-Evo Pedals are built for Windows PC users and connect directly via USB, which keeps setup clean and latency low. The pedals support SimHub and iRacing’s native vibration feedback systems through the built-in M-DVF module, a standout feature not commonly found in similarly priced sets. As a standalone USB device, they don’t rely on a base or separate control box to operate. However, they do not support console systems like PlayStation or Xbox, and there’s no known adapter to make them work with those platforms. From a platform standpoint, this set is for PC sim racers running titles like iRacing, Assetto Corsa, rFactor 2, RaceRoom, and similar PC-focused sims. The pedals rely on PC-native software and telemetry integration, meaning they will not function with console games even if connected through a base that supports them. The hydraulic and haptic systems require software input that is only available through PC environments—so if you're racing on a console, these won't be your match.

Read more less

Conspit CPP-Lite pedals pack a serious punch in a compact footprint. Built around a rigid T6 aluminum alloy frame, they combine clean machining with clever tech for a setup that doesn’t just look the part—it backs it up every lap. The hydraulic brake with M‑DVF vibration feedback gives the brake pedal actual texture, not just resistance. And the non-contact Hall sensors on the throttle ensure a silky input curve that’s just as suited for feathering around corners as it is for hammering down the straights. What Sets the Conspit CPP-Lite apart? Smooth Throttle Control with Zero Wear Hall effect sensors aren’t new, but the way Conspit implements them here gets attention. The throttle and clutch use concealed non-contact sensors, so you’re not grinding against any physical wear points. That translates to consistently smooth inputs over time and minimal signal drift—especially helpful when fine modulation is needed in traction-limited conditions. Racers love how refined the throttle pedal feels, especially when trail throttling out of tight corners. Hydraulic Brake That Feels Predictable While many pedal sets in this range stick to load cells, the CPP-Lite’s hydraulic brake offers a noticeable difference in feel and linearity. It reacts to pressure more like a real brake system, with fluid response instead of spring compression alone. Users consistently say that it delivers better pedal modulation across long stints, and that it’s easier to trust under heavy braking than purely mechanical systems. Integrated Vibration Adds Useful Feedback The built-in M‑DVF vibration system is more than a gimmick—it gives tactile cues that drivers often rely on but don’t get in sim setups. Whether it’s ABS triggering, tire lockup, or road texture, it helps make up for the lack of physical seat movement in a static rig. It syncs with SimHub and iRacing directly, which makes it plug-and-play for most racers and a huge bonus for training consistency. iSpeed Software Makes Setup Intuitive The included software, developed with iSpeed Racing, provides detailed telemetry overlays, custom throttle and brake curves, and 0–100 km/h acceleration testing. It’s one of the few packages where the software is actually useful instead of being a chore. Many users highlight how easy it is to dial in pedal behavior for different cars without needing to dive into external software or guesswork. Pros and Cons Pros Cons Hydraulic brake system provides fluid pedal feedback No native support for consoles Non-contact Hall sensors improve long-term accuracy Clutch not included in standard version Built-in vibration works with SimHub and iRacing Software offers detailed tuning and telemetry tools Specifications Specification Value Brand Conspit® Platform PC Material T6 aluminum alloy with CNC machining Color Black, Purple Connection USB Product Weight 6 kg Brake Sensor Hydraulic Throttle Sensor Non-contact Hall effect Vibration System M‑DVF, compatible with SimHub and iRacing Software Support iSpeed Racing plugin, real-time tuning + telemetry Conspit CPP-Lite Compatibility Component Compatible? Windows PC Yes iSpeed Racing Software Yes SimHub Yes iRacing Vibration Feedback Yes Console Platforms (PlayStation, Xbox) No Connection Type USB The Conspit CPP-Lite connects directly via USB and is fully compatible with Windows PC setups. It supports SimHub and iRacing vibration feedback through its built-in M‑DVF system, giving it a direct link to telemetry data without needing external motors or shakers. It integrates smoothly with the iSpeed Racing software, which offers comprehensive control and tuning options. The build is universal in design, so it fits with nearly all sim racing rigs that accommodate pedal mounting plates—but note, a clutch pedal may be optional depending on the configuration. Platform-wise, this is strictly a PC-focused pedal set. The USB interface works with most sim racing titles including iRacing, Assetto Corsa, ACC, and rFactor 2. That said, it does not support consoles like Xbox or PlayStation directly, and there’s no console-compatible mode or firmware workarounds available. If you're running a console-based rig, these pedals won’t interface without a PC-based input hub or custom controller mapping, which isn’t officially supported.

Read more less

Cube Controls SP01 Core Pedals offer that rare blend of design purity and performance tuning that makes them feel like they were made for your feet and your rig. Built from CNC-machined aerospace aluminum and designed with obsessive attention to detail, the SP01 Core packs serious feel into a compact package. The adjustability is intuitive, the load cell is rock solid, and the smoothness of travel makes every modulated brake or throttle input feel calculated—because it is. What Sets the Cube Controls SP01 Core Pedals apart? Compact Design Without Compromise Some pedal sets go big and heavy to prove their strength—SP01 Core does the opposite. It’s lightweight and compact but structurally rigid where it counts, thanks to its single-block CNC aluminum chassis and FEM-optimized design. It doesn’t flex under pressure and doesn’t demand a full cockpit rebuild just to fit. Users love how easily it integrates into tight rigs without giving up performance or modularity. Tool-Free Adjustments That Actually Work The SP01 Core gives you direct, easy access to spring preload and pedal throw without diving into a toolbox. A dedicated knob on the throttle and clearly marked adjustments on the brake and pedal plates let you dial in your feel with minimal downtime. Feedback from users highlights how fast they can switch between GT, Formula, or Rally setups with confidence and without frustration. Pedal Feel That Reflects Load and Motion Naturally This set uses a 200kg load cell with an improved kinematic design that transmits pressure directly to the sensor. That’s more than just numbers—it translates to a smooth, progressive braking feel that doesn’t spike or fade. Combine that with the redesigned main spring and dampers, and you get a pedal stroke that feels planted but never dull. It responds like something twice its weight, but with better balance. Upgradeable Through Performance Kit Compatibility Unlike many entry-level sets that lock you into the stock feel, the SP01 Core is compatible with Cube Controls’ existing performance kit. That means swappable elastomers, additional damper options, and custom springs—opening up tuning for different disciplines or sim titles. Racers who've already invested in the upgrade path appreciate how it scales with them, rather than needing to be replaced once they level up their gear. Pros and Cons Pros Cons Compact and lightweight but structurally rigid No clutch pedal in the Core version Easy tool-free adjustment of pedal throw and preload Performance kit sold separately 200kg load cell with smooth pressure response Upgradeable with Cube Controls performance components Specifications Specification Value Construction CNC-machined aerospace aluminum Throttle Sensor 16-bit hall sensor Brake Sensor 200 kg load cell Adjustability Preload, pedal throw, spring/damper swaps Pedal Travel Adjustable via shaft knob (throttle) Resolution 16-bit Connectivity USB-C Dimensions 41.5 × 34 × 16.5 cm Weight 4.5 kg Included Accessories Not specified Cube Controls SP01 Core Pedals Compatibility Component Compatible? PC (Windows) Yes USB-C Direct Connection Yes Cube Controls Performance Kit Yes External Control Boxes Not required Console Platforms (PlayStation, Xbox) No The Cube Controls SP01 Core Pedals connect directly via USB-C and are fully compatible with PC-based sim racing setups. They do not require an external control box, making cable management cleaner and setup easier, especially for compact rigs. The pedals integrate smoothly with sim platforms such as iRacing, Assetto Corsa, ACC, and rFactor 2. For users looking to expand, the pedals are compatible with Cube Controls’ performance upgrade kit, allowing for long-term tuning flexibility. As with most gear in this class, the SP01 Core is not compatible with PlayStation or Xbox consoles and has no console-specific firmware or compatibility layers. These pedals are designed for PC sim racers looking to get serious with a modular, scalable setup that performs well out of the box and continues to grow with additional tuning. If you’re building a dedicated PC rig, they slot right in and deliver strong results from day one.

Read more less

The Moza CRP2 Pedals bring a bold blend of craftsmanship and customization to sim racing setups. Built with aerospace-grade aluminum and reinforced with a robust carbon fiber heel plate, these pedals are engineered to last under pressure. Featuring a 200 kg load cell sensor for accurate braking control and offering over 1,700 customization options, this pedal set is as versatile as it is durable. Whether you're fine-tuning your throttle response or dialing in brake feel, the Moza CRP2 delivers a racing experience you can tailor to your style. What sets the Moza CRP2 Pedals apart? Customizable Brake Pedal Feel The CRP2 allows users to swap out rubber blocks with varying hardness levels and configure the damper system. With up to 125 braking feel combinations, racers can emulate the behavior of cars ranging from rally vehicles to Formula 3 machines, providing a tailored experience for every driving style. Durable and High-End Materials Constructed from aerospace-grade aluminum and featuring a carbon fiber heel plate, the CRP2 pedals resist wear and tear even during extended use. This commitment to robust materials ensures longevity and stability, particularly during high-intensity racing sessions. Seamless Adjustability Adjustable pedal angles, distances, and travel ensure these pedals can accommodate different setups and ergonomic preferences. Whether you prefer a traditional layout or something more compact, the CRP2 adapts with ease. Tool-Free Spring and Damper Changes Changing springs and dampers is effortless with the CRP2's design, allowing racers to tweak pedal resistance on the fly without interrupting a session. This feature saves time and adds convenience for those who frequently adjust their setup. Pros and Cons Pros Cons Highly customizable braking feel with multiple options. Optional clutch pedal sold separately. Durable materials like aluminum and carbon fiber. Limited console compatibility via the ESX wheel only. Tool-free adjustments for quick setup changes. Higher price point than some competitors. Adjustable angles, travel, and pedal distance. Specifications Specification Value Material Aerospace-grade aluminum alloy Load Cell Power 200 kg Dimensions 364mm x 415.1mm x 256.5mm Weight 7.5 kg Connection USB Platform Compatibility PC (Windows) and Xbox (with ESX wheel) Adjustability Pedal angle, distance, and travel Optional Add-ons Clutch pedal, performance kits Moza CRP2 Pedals Compatibility The Moza CRP2 Pedals are highly compatible within the Moza ecosystem, especially when paired with the ESX steering wheel for Xbox support. They also integrate seamlessly with Moza's direct-drive bases, ensuring a cohesive setup. However, these pedals do not support other consoles like PlayStation or generic third-party wheels, limiting cross-brand flexibility. This makes them ideal for sim racers committed to Moza’s ecosystem or PC users who need premium pedal control. For gaming platforms, the CRP2 pedals connect via USB and are designed for PC (Windows 10 and above). With the ESX wheel, they extend functionality to Xbox consoles, but they lack compatibility with macOS and Linux systems. Supported games include titles like iRacing, Assetto Corsa, and F1, providing a smooth integration for serious sim racers.

Read more less

Moza mBooster Active Pedal redefines sim racing control by integrating force feedback directly into the pedal system. The dual 200KG pressure sensors detect braking force with pinpoint accuracy, offering a wide range of control from light feathering to heavy threshold braking. The adjustable force feedback system delivers haptic cues for ABS activation, gear shifts, and traction loss, adding another layer of realism to every lap. With software-driven customization, a high-precision sensor suite, and an ergonomic footplate, this pedal is built for racers who demand control beyond just input sensitivity. What Sets the Moza mBooster Active Pedal apart? Force Feedback You Can Feel Unlike passive pedal systems, this one integrates motor-driven force feedback directly into braking and throttle control. Whether it's ABS engagement, traction loss, or even shift impacts, the feedback system provides real-time cues to keep your inputs precise and reactive. Precision Sensors for Consistent Braking Equipped with dual 200KG pressure sensors and a 15-bit angle sensor, this pedal captures braking force with extreme accuracy. No dead zones, no mechanical wear—just reliable input that remains consistent over time, whether you're fine-tuning a braking zone or slamming the pedal to avoid a collision. Fully Customizable with Moza Pit House Software Software-based adjustments let you modify force curves, feedback intensity, and input behavior without needing to swap out physical components. One-click tuning makes it easy to switch between road car, GT, or open-wheel setups in seconds. Modular Design with Multiple Setup Options This pedal integrates seamlessly with Moza’s CRP2 pedal set, allowing users to expand their setup with additional input options. Whether used as a throttle, brake, or clutch, it adapts to different racing disciplines with minimal configuration effort. Pros and Cons Pros Cons Force feedback system simulates ABS and traction loss Requires external power for force feedback Dual pressure sensors for consistent braking input PC-only, no console support One-click software adjustments for tuning pedal feel Modular compatibility with Moza CRP2 pedals Specifications Specification Value Pedal Type Throttle, Brake, or Clutch Force Feedback Motorized, telemetry-based feedback Pressure Sensors Dual 200KG sensors Maximum Detected Force 400KG Angle Sensor 15-bit high-precision Housing Material Composite Footplate Design Biomimetic curved surface Noise Level 44dB Software Moza Pit House Compatibility PC Modular Compatibility Moza CRP2 Pedals Moza mBooster Active Pedal Compatibility Compatible With Not Compatible With Moza Pit House software for customization Console platforms Moza CRP2 Pedal set Third-party pedal sets Direct PC connection MacOS Designed exclusively for PC racing setups, the mBooster integrates directly with Moza Pit House software, allowing for software-driven pedal tuning and telemetry-based force feedback adjustments. It pairs with the Moza CRP2 pedal set, making it easy to configure as a brake, throttle, or clutch depending on user preference. PC-only compatibility ensures seamless operation with Assetto Corsa, iRacing, rFactor 2, and Automobilista 2. However, console users will need to explore alternative solutions, as this system does not support Xbox or PlayStation hardware.

Read more less

The Moza SR-P Pedals offer a solid, precise feel that sim racers crave, constructed from high-strength steel to endure intense racing sessions. Whether you're a two-pedal or three-pedal driver, these pedals deliver exceptional control, thanks to features like the 100KG load cell brake sensor and an adjustable pedal surface height. The organ-type throttle pedal design ensures your foot follows a natural trajectory, making every throttle input smooth and predictable. It’s the kind of setup that gives you confidence to push harder lap after lap. What sets the Moza SR-P Pedals apart? Load Cell Braking Power A 100KG capacity load cell brake sensor elevates the Moza SR-P pedals above others in its class. This provides detailed feedback for fine-tuning braking force, giving you full control over how much pressure to apply—without worrying about squishy or inconsistent pedal feel that some cheaper alternatives suffer from. Dual Sensor Fusion Technology The combination of angle and pressure sensors for braking creates a smooth and highly controlled deceleration experience. The angle sensor governs early-stage braking, while the pressure sensor kicks in for harder braking at the end of travel. This dual-stage feedback system offers a more intuitive and layered brake response. Highly Adjustable Design Unlike some pedals that lock you into a fixed setup, the Moza SR-P pedals offer customizable pedal spacing and height adjustment. Whether you prefer pedals close together or spaced further apart for comfort, the SR-P pedals let you tailor them to your rig and driving style without compromise. Magnetic Encoder Precision Forget about the wear and tear of Hall sensors. These pedals use a 16-bit magnetic encoder with 65,536 PPR resolution. This means super accurate input readings across all three pedals, providing an ultra-smooth and linear feel that’s perfect for competitive racing. Pros and Cons Pros Cons Strong build quality with high-strength steel construction. No direct compatibility with consoles like PlayStation or Xbox. Load cell brake with up to 100KG pressure sensitivity. Limited to USB for PC connection, no wireless option. Highly adjustable pedal height and spacing for comfort. Specifications Specification Value Weight 10.3 kg Dimensions 54.6 cm x 46.4 cm x 21.2 cm Material High-strength steel / CNC Aluminum Alloy Max Range of Pressure Sensor 100KG Sensor Type (Brake) Pressure + Angle Sensor Sensor Type (Throttle & Clutch) Angle Sensor Encoder Resolution 16-bit (65536 PPR) Pedal Spacing Adjustable Pedal Surface Height Adjustable Pedal Connection Port USB Moza SR-P Pedals The Moza SR-P Pedals are designed for versatility, making them compatible with a wide range of setups. You can connect them directly to your PC via USB, ensuring a seamless integration with most sim racing rigs. The adjustable pedal spacing and height allow them to fit into both compact and more spacious cockpits. However, these pedals are designed with PC use in mind, so if you're a console racer, you may need to consider other options or additional hardware adapters. In terms of compatibility with games, the SR-P pedals work smoothly with major PC sim titles like iRacing, Assetto Corsa, and rFactor 2. Unfortunately, they are not natively compatible with consoles like PlayStation or Xbox, limiting their use to PC platforms only. For those in the sim racing community who focus on PC gaming, these pedals integrate flawlessly with a wide range of racing software.

Read more less

The Moza SR-P Lite Brake Pedal Performance Kit is the upgrade your pedals have been waiting for! This kit offers a perfect balance of resistance and progression with its combination of springs and damping blocks, delivering a braking feel that’s a dream for sim racers. Built to last, the sturdy and durable components are designed to handle countless hours of use. Plus, the installation is so straightforward, even your pre-race jitters won’t slow you down. What Sets the Moza SR-P Lite Brake Pedal Performance Kit apart? Enhanced Braking Resistance The spring and damping block combination increases braking resistance, offering a progressive feel that helps fine-tune your braking inputs. This setup ensures better control over your stopping power, making every lap feel consistent and controlled. Durability to Go the Distance The kit is designed with materials that withstand extensive use, meaning it can handle those intense endurance races or long practice sessions. Users report that it remains reliable even after countless hours of competitive racing. Hassle-Free Installation With just two screws and a quick pivot alignment, the installation process is incredibly intuitive. It’s a no-fuss upgrade that saves you time for more important things—like beating your lap records. Specifically Tuned for SR-P Lite Pedals The kit’s design perfectly complements the SR-P Lite Pedals, enhancing their overall functionality without altering their integrity. However, it’s not compatible with other pedal models, ensuring focused optimization. Pros and Cons Pros Cons Provides enhanced braking resistance and progression. Only compatible with SR-P Lite Pedals. Durable design withstands extended use. May require some adjustment for perfect feel. Quick and simple installation process. Specifications Specification Value Model MOZA SR-P Lite Brake Performance Kit Dimensions 20.00cm x 10.00cm x 10.00cm Weight 0.50kg Material Spring and damping block Compatibility SR-P Lite Pedals Moza SR-P Lite Brake Pedal Performance Kit Compatibility The Moza SR-P Lite Brake Pedal Performance Kit is exclusively compatible with the SR-P Lite Pedals, ensuring a focused and optimized fit for this specific model. It’s worth noting that this kit does not work with the standard SR-P pedals or other third-party pedal setups, making it essential to verify your pedal model before purchase. Its tailored design ensures an enhanced experience for the intended hardware. For sim racers, this kit integrates seamlessly into PC-based setups running popular simulators like iRacing and Assetto Corsa. While console compatibility isn’t directly supported, it shines in PC configurations where precision and adaptability matter the most.

Read more less

The Simagic P1000 Pedals are designed to give sim racers serious control over their setup. Built with an all-aluminum alloy structure, these pedals feature both a loadcell sensor and optional hydraulic system for ultimate accuracy. Whether you're looking for long pedal travel for road cars or short, responsive inputs for race cars, the Simagic P1000 Pedals adapt with adjustable stroke, spacing, and force. With over 27,000 customization options, the P1000 is all about tuning your setup to match your driving style with absolute precision. What sets the Simagic P1000 Pedals apart? Unparalleled Customization The modular design of the Simagic P1000 allows for 27,648 possible configurations, including adjustable pedal stroke, height, and resistance. Whether you prefer road cars or racing simulations, this flexibility ensures that you can dial in exactly the feel you're after. Users love how much fine-tuning is possible, even for minor adjustments. Loadcell and Hall Angle Sensors The P1000 offers both loadcell and Hall angle sensors, allowing you to switch between setups depending on your driving style. This dual-sensor capability is a standout feature, especially for those who switch between simulations and need the accuracy of a loadcell for race cars or the smoothness of Hall sensors for road cars. Optional Hydraulic System The optional P-HYS hydraulic system provides a more realistic brake feel, emulating the damping and rebound you’d experience in real cars. This adds another layer of depth to your pedal feel, especially for braking accuracy. The modularity means you can add it later, making these pedals future-proof for upgrades. Durable CNC Aluminum Build Constructed from CNC aluminum, these pedals are designed to last through over 200,000 presses without flaw. This durability, combined with the solid, sturdy design, ensures that the pedals can withstand heavy, competitive use. Feedback from users confirms their reliability, even under intense conditions. Pros and Cons Pros Cons Highly customizable with 27,000+ configuration options. Hydraulic system is an additional purchase. Loadcell and Hall sensors switchable for different setups. Initial setup may be complex for beginners. Durable all-aluminum CNC construction. Optional haptic feedback for extra immersion. Specifications Specification Value Frame Material CNC Aluminum Alloy Pedal Sensors Loadcell (100kg) & Hall Angle Sensors Resolution 12-bit (4096) Adjustable Features Travel, Spring Force, Spacing, Height, Stroke, Angle Optional Add-ons Hydraulic System, Haptic Feedback, Rubber Pads Pedal Plates Anodized Aluminum Alloy Dimensions 348 x 489.8 x 368.5mm Weight 7.6kg Connection USB (PC), Simagic Wheelbase (Can-Bus) Simagic P1000 Pedals Compatibility The Simagic P1000 Pedals connect easily via USB, making them highly compatible with PC-based racing simulators such as iRacing, Assetto Corsa, and rFactor 2. They can also be integrated with Simagic wheelbases using the CAN-Bus port. However, these pedals are not compatible with consoles like PlayStation or Xbox, making them more suited for PC setups. The modular design means they fit easily into most racing cockpits and sim rigs, as long as the proper mounting options are available. When it comes to gaming platforms, the P1000 pedals are fully compatible with PC gaming systems and work flawlessly with a variety of racing titles that support high-end hardware. While they shine on Windows-based systems, they won’t work on gaming consoles, limiting their use to sim racers who focus on PC-based simulations. With the loadcell sensor and optional hydraulic system, they offer an incredibly responsive experience for games that prioritize brake accuracy and force feedback.

Read more less

The Simagic P1000i Inverted Pedals deliver a pedal experience crafted for serious sim racers, engineered for those who want a more natural car feel. Designed for drift and precision braking, the P1000i combines CNC-machined aluminum and 100kg load cell with multiple customization options, so you can fine-tune every detail from angle to compression strength. Its unique design eliminates complex installation, and paired with Simagic’s SimPro Manager, it lets you create an impressively tailored setup without losing a moment of racing. What sets the Simagic P1000i Inverted Pedals apart? Modular, Adjustable Brake System The P1000i's brake system allows for deep customization, from stroke length to compressive strength. Users enjoy that it can adapt to different driving styles by swapping between eight rubber pads, enabling one of the most personalized braking experiences available in sim racing setups. Inverted Design for Realistic Feel Unlike most setups, these pedals feature an inverted design to simulate the feel of a real vehicle, particularly appreciated by drift enthusiasts. This setup provides a sensation of weight distribution more commonly found in road cars, making it an exciting pick for sim racers who crave that real-world driving sensation. Customizable Pedal Position and Angle The P1000i allows racers to adjust each pedal’s angle, stroke length, and even lateral positioning. For racers with specific ergonomic needs, this customization means dialing in precise configurations that fit their natural posture and foot positioning, enhancing control over long sessions. Versatile Sensor Options With a choice of load cell sensor or Hall angle sensor, racers can switch depending on the type of driving they plan to focus on. The load cell is ideal for those looking for braking strength, while the Hall angle sensor is beneficial for precision inputs, so each setup is highly adaptable. Pros and Cons Pros Cons Highly adjustable brake and pedal settings. Inverted design requires specific mounting space. Multiple sensors for customized pedal response. Not compatible with consoles without the Sigma Cortex Durable CNC-machined aluminum construction. Silent bearing structure on clutch pedal. Specifications Specification Value Product Type Inverted Pedal System Frame Material CNC-Machined Aluminum Alloy Brake Load Cell 100kg Brake Stroke Adjustment Yes Brake Compressive Strength Adjustment Yes Pedal Angle Adjustment Yes Lateral Pedal Position Adjustment Yes Pedal Configuration Options 27,648 Foot Pedal Material Anodized Aluminum Alloy Included Springs 3 for Clutch Silent Bearing Structure Included Simagic P1000i Inverted Pedals Compatibility The Simagic P1000i Inverted Pedals integrate best with Simagic wheelbases and setups, giving full functionality with the SimPro Manager software for seamless adjustment. These pedals connect directly via USB to a PC, allowing for a straightforward installation and ensuring compatibility with leading sim setups that support USB peripherals. However, these pedals are limited in compatibility with consoles, focusing solely on a PC experience, which is ideal for sim racing enthusiasts aiming for a tailored PC setup. When it comes to game compatibility, the P1000i pedals work with a wide array of PC racing titles, including Assetto Corsa, iRacing, and rFactor 2, bringing adjustable pedal sensitivity and customization to the forefront of these gaming platforms. While not compatible with consoles without the Sigma Cortex, these pedals ensure a consistent, professional connection and performance for most leading PC racing sims.

Read more less