Conspit CPP-Evo Pedals bring that firm, progressive pedal feel you didn’t realize you were missing—until now. Designed with a 2nd Generation Dual-Stage Hydraulic System and a seriously dialed-in construction, this set is about giving your feet the feel and control they’d have in a proper race car. From the soft initial bite to the stiff final press, each stroke is satisfying and repeatable. Add in the M-DVF vibration feedback module, and you’ve got a setup that talks to you with every corner and braking zone. What Sets the Conspit CPP-Evo Pedals apart? Differentiated Dual-Stage Brake Feel What really stands out is the braking system—this isn’t just about resistance. The pedal transitions through a soft elastomer at first, then stiffens dramatically as both front and rear chambers compress together. It's the sort of feeling you typically only find in high-end race-prep cars. Racers online consistently say it's one of the closest experiences to threshold braking they've found in sim gear without moving up to custom motorsport conversions. Hydraulic Sensor That Picks Up Everything The 20MPa pressure sensor isn’t just there for show. It registers subtle pedal modulation with excellent consistency across long sessions. That means it doesn’t just survive endurance runs—it delivers lap after lap without fade or noise in the signal. Users often mention how much confidence it gives them under trail braking and heavy braking zones where detail and consistency really count. Mechanical Adjustability Without the Headache You can tweak nearly every aspect of this pedal set, from angle and height to bite points and spring preload. And it’s not the kind of adjustability that takes an engineering degree either—adjustments are simple and well-marked. Compared to other pedals with similar customization, racers highlight how quickly they were able to find a “sweet spot” that worked for their driving style. M-DVF Vibration Module Brings Back Missing Sensation The built-in vibration system plugs directly into SimHub or iRacing’s telemetry, delivering rumble cues through the pedal body that simulate surface changes, ABS pulses, or locking tires. Most sets in this price range skip haptics entirely or need you to buy third-party mods. Here, it’s integrated, and it adds a layer of sensory feedback that racers didn’t realize they were missing—until they try driving without it. Pros and Cons Pros Cons Dual-stage hydraulic brake offers distinct pedal phases Limited compatibility outside Windows PC Wide adjustability in pedal feel and geometry Setup may require tuning for optimal performance Integrated vibration feedback supports SimHub and iRacing Durable CNC-machined aluminum construction Specifications Specification Value Brake System 2nd Generation Dual-Stage Hydraulic Hydraulic Sensor 20 MPa high-precision sensor Pedal Adjustability Angle, height, spacing, footrest, spring preload Brake Adjustability Front/rear preload + 4 pedal force levels Throttle Adjustability 4 pedal force levels + travel/preload Clutch Adjustability Spring preload + 4 bite point levels Vibration Module M-DVF, compatible with iRacing & SimHub Materials CNC-machined 6061-T6 aluminum, sandblasted/anodized Connection USB Platform Windows PC Conspit CPP-Evo Pedals Compatibility Component Compatible? Windows PC Yes SimHub Yes iRacing Native Feedback Yes Console Platforms (Xbox, PlayStation) No USB Pedal Interfaces Yes (direct via USB) The Conspit CPP-Evo Pedals are built for Windows PC users and connect directly via USB, which keeps setup clean and latency low. The pedals support SimHub and iRacing’s native vibration feedback systems through the built-in M-DVF module, a standout feature not commonly found in similarly priced sets. As a standalone USB device, they don’t rely on a base or separate control box to operate. However, they do not support console systems like PlayStation or Xbox, and there’s no known adapter to make them work with those platforms. From a platform standpoint, this set is for PC sim racers running titles like iRacing, Assetto Corsa, rFactor 2, RaceRoom, and similar PC-focused sims. The pedals rely on PC-native software and telemetry integration, meaning they will not function with console games even if connected through a base that supports them. The hydraulic and haptic systems require software input that is only available through PC environments—so if you're racing on a console, these won't be your match.

Read more less

Conspit CPP-Lite pedals pack a serious punch in a compact footprint. Built around a rigid T6 aluminum alloy frame, they combine clean machining with clever tech for a setup that doesn’t just look the part—it backs it up every lap. The hydraulic brake with M‑DVF vibration feedback gives the brake pedal actual texture, not just resistance. And the non-contact Hall sensors on the throttle ensure a silky input curve that’s just as suited for feathering around corners as it is for hammering down the straights. What Sets the Conspit CPP-Lite apart? Smooth Throttle Control with Zero Wear Hall effect sensors aren’t new, but the way Conspit implements them here gets attention. The throttle and clutch use concealed non-contact sensors, so you’re not grinding against any physical wear points. That translates to consistently smooth inputs over time and minimal signal drift—especially helpful when fine modulation is needed in traction-limited conditions. Racers love how refined the throttle pedal feels, especially when trail throttling out of tight corners. Hydraulic Brake That Feels Predictable While many pedal sets in this range stick to load cells, the CPP-Lite’s hydraulic brake offers a noticeable difference in feel and linearity. It reacts to pressure more like a real brake system, with fluid response instead of spring compression alone. Users consistently say that it delivers better pedal modulation across long stints, and that it’s easier to trust under heavy braking than purely mechanical systems. Integrated Vibration Adds Useful Feedback The built-in M‑DVF vibration system is more than a gimmick—it gives tactile cues that drivers often rely on but don’t get in sim setups. Whether it’s ABS triggering, tire lockup, or road texture, it helps make up for the lack of physical seat movement in a static rig. It syncs with SimHub and iRacing directly, which makes it plug-and-play for most racers and a huge bonus for training consistency. iSpeed Software Makes Setup Intuitive The included software, developed with iSpeed Racing, provides detailed telemetry overlays, custom throttle and brake curves, and 0–100 km/h acceleration testing. It’s one of the few packages where the software is actually useful instead of being a chore. Many users highlight how easy it is to dial in pedal behavior for different cars without needing to dive into external software or guesswork. Pros and Cons Pros Cons Hydraulic brake system provides fluid pedal feedback No native support for consoles Non-contact Hall sensors improve long-term accuracy Clutch not included in standard version Built-in vibration works with SimHub and iRacing Software offers detailed tuning and telemetry tools Specifications Specification Value Brand Conspit® Platform PC Material T6 aluminum alloy with CNC machining Color Black, Purple Connection USB Product Weight 6 kg Brake Sensor Hydraulic Throttle Sensor Non-contact Hall effect Vibration System M‑DVF, compatible with SimHub and iRacing Software Support iSpeed Racing plugin, real-time tuning + telemetry Conspit CPP-Lite Compatibility Component Compatible? Windows PC Yes iSpeed Racing Software Yes SimHub Yes iRacing Vibration Feedback Yes Console Platforms (PlayStation, Xbox) No Connection Type USB The Conspit CPP-Lite connects directly via USB and is fully compatible with Windows PC setups. It supports SimHub and iRacing vibration feedback through its built-in M‑DVF system, giving it a direct link to telemetry data without needing external motors or shakers. It integrates smoothly with the iSpeed Racing software, which offers comprehensive control and tuning options. The build is universal in design, so it fits with nearly all sim racing rigs that accommodate pedal mounting plates—but note, a clutch pedal may be optional depending on the configuration. Platform-wise, this is strictly a PC-focused pedal set. The USB interface works with most sim racing titles including iRacing, Assetto Corsa, ACC, and rFactor 2. That said, it does not support consoles like Xbox or PlayStation directly, and there’s no console-compatible mode or firmware workarounds available. If you're running a console-based rig, these pedals won’t interface without a PC-based input hub or custom controller mapping, which isn’t officially supported.

Read more less

Cube Controls SP01 Core Pedals offer that rare blend of design purity and performance tuning that makes them feel like they were made for your feet and your rig. Built from CNC-machined aerospace aluminum and designed with obsessive attention to detail, the SP01 Core packs serious feel into a compact package. The adjustability is intuitive, the load cell is rock solid, and the smoothness of travel makes every modulated brake or throttle input feel calculated—because it is. What Sets the Cube Controls SP01 Core Pedals apart? Compact Design Without Compromise Some pedal sets go big and heavy to prove their strength—SP01 Core does the opposite. It’s lightweight and compact but structurally rigid where it counts, thanks to its single-block CNC aluminum chassis and FEM-optimized design. It doesn’t flex under pressure and doesn’t demand a full cockpit rebuild just to fit. Users love how easily it integrates into tight rigs without giving up performance or modularity. Tool-Free Adjustments That Actually Work The SP01 Core gives you direct, easy access to spring preload and pedal throw without diving into a toolbox. A dedicated knob on the throttle and clearly marked adjustments on the brake and pedal plates let you dial in your feel with minimal downtime. Feedback from users highlights how fast they can switch between GT, Formula, or Rally setups with confidence and without frustration. Pedal Feel That Reflects Load and Motion Naturally This set uses a 200kg load cell with an improved kinematic design that transmits pressure directly to the sensor. That’s more than just numbers—it translates to a smooth, progressive braking feel that doesn’t spike or fade. Combine that with the redesigned main spring and dampers, and you get a pedal stroke that feels planted but never dull. It responds like something twice its weight, but with better balance. Upgradeable Through Performance Kit Compatibility Unlike many entry-level sets that lock you into the stock feel, the SP01 Core is compatible with Cube Controls’ existing performance kit. That means swappable elastomers, additional damper options, and custom springs—opening up tuning for different disciplines or sim titles. Racers who've already invested in the upgrade path appreciate how it scales with them, rather than needing to be replaced once they level up their gear. Pros and Cons Pros Cons Compact and lightweight but structurally rigid No clutch pedal in the Core version Easy tool-free adjustment of pedal throw and preload Performance kit sold separately 200kg load cell with smooth pressure response Upgradeable with Cube Controls performance components Specifications Specification Value Construction CNC-machined aerospace aluminum Throttle Sensor 16-bit hall sensor Brake Sensor 200 kg load cell Adjustability Preload, pedal throw, spring/damper swaps Pedal Travel Adjustable via shaft knob (throttle) Resolution 16-bit Connectivity USB-C Dimensions 41.5 × 34 × 16.5 cm Weight 4.5 kg Included Accessories Not specified Cube Controls SP01 Core Pedals Compatibility Component Compatible? PC (Windows) Yes USB-C Direct Connection Yes Cube Controls Performance Kit Yes External Control Boxes Not required Console Platforms (PlayStation, Xbox) No The Cube Controls SP01 Core Pedals connect directly via USB-C and are fully compatible with PC-based sim racing setups. They do not require an external control box, making cable management cleaner and setup easier, especially for compact rigs. The pedals integrate smoothly with sim platforms such as iRacing, Assetto Corsa, ACC, and rFactor 2. For users looking to expand, the pedals are compatible with Cube Controls’ performance upgrade kit, allowing for long-term tuning flexibility. As with most gear in this class, the SP01 Core is not compatible with PlayStation or Xbox consoles and has no console-specific firmware or compatibility layers. These pedals are designed for PC sim racers looking to get serious with a modular, scalable setup that performs well out of the box and continues to grow with additional tuning. If you’re building a dedicated PC rig, they slot right in and deliver strong results from day one.

Read more less

The Moza CRP2 Pedals bring a bold blend of craftsmanship and customization to sim racing setups. Built with aerospace-grade aluminum and reinforced with a robust carbon fiber heel plate, these pedals are engineered to last under pressure. Featuring a 200 kg load cell sensor for accurate braking control and offering over 1,700 customization options, this pedal set is as versatile as it is durable. Whether you're fine-tuning your throttle response or dialing in brake feel, the Moza CRP2 delivers a racing experience you can tailor to your style. What sets the Moza CRP2 Pedals apart? Customizable Brake Pedal Feel The CRP2 allows users to swap out rubber blocks with varying hardness levels and configure the damper system. With up to 125 braking feel combinations, racers can emulate the behavior of cars ranging from rally vehicles to Formula 3 machines, providing a tailored experience for every driving style. Durable and High-End Materials Constructed from aerospace-grade aluminum and featuring a carbon fiber heel plate, the CRP2 pedals resist wear and tear even during extended use. This commitment to robust materials ensures longevity and stability, particularly during high-intensity racing sessions. Seamless Adjustability Adjustable pedal angles, distances, and travel ensure these pedals can accommodate different setups and ergonomic preferences. Whether you prefer a traditional layout or something more compact, the CRP2 adapts with ease. Tool-Free Spring and Damper Changes Changing springs and dampers is effortless with the CRP2's design, allowing racers to tweak pedal resistance on the fly without interrupting a session. This feature saves time and adds convenience for those who frequently adjust their setup. Pros and Cons Pros Cons Highly customizable braking feel with multiple options. Optional clutch pedal sold separately. Durable materials like aluminum and carbon fiber. Limited console compatibility via the ESX wheel only. Tool-free adjustments for quick setup changes. Higher price point than some competitors. Adjustable angles, travel, and pedal distance. Specifications Specification Value Material Aerospace-grade aluminum alloy Load Cell Power 200 kg Dimensions 364mm x 415.1mm x 256.5mm Weight 7.5 kg Connection USB Platform Compatibility PC (Windows) and Xbox (with ESX wheel) Adjustability Pedal angle, distance, and travel Optional Add-ons Clutch pedal, performance kits Moza CRP2 Pedals Compatibility The Moza CRP2 Pedals are highly compatible within the Moza ecosystem, especially when paired with the ESX steering wheel for Xbox support. They also integrate seamlessly with Moza's direct-drive bases, ensuring a cohesive setup. However, these pedals do not support other consoles like PlayStation or generic third-party wheels, limiting cross-brand flexibility. This makes them ideal for sim racers committed to Moza’s ecosystem or PC users who need premium pedal control. For gaming platforms, the CRP2 pedals connect via USB and are designed for PC (Windows 10 and above). With the ESX wheel, they extend functionality to Xbox consoles, but they lack compatibility with macOS and Linux systems. Supported games include titles like iRacing, Assetto Corsa, and F1, providing a smooth integration for serious sim racers.

Read more less

Moza mBooster Active Pedal redefines sim racing control by integrating force feedback directly into the pedal system. The dual 200KG pressure sensors detect braking force with pinpoint accuracy, offering a wide range of control from light feathering to heavy threshold braking. The adjustable force feedback system delivers haptic cues for ABS activation, gear shifts, and traction loss, adding another layer of realism to every lap. With software-driven customization, a high-precision sensor suite, and an ergonomic footplate, this pedal is built for racers who demand control beyond just input sensitivity. What Sets the Moza mBooster Active Pedal apart? Force Feedback You Can Feel Unlike passive pedal systems, this one integrates motor-driven force feedback directly into braking and throttle control. Whether it's ABS engagement, traction loss, or even shift impacts, the feedback system provides real-time cues to keep your inputs precise and reactive. Precision Sensors for Consistent Braking Equipped with dual 200KG pressure sensors and a 15-bit angle sensor, this pedal captures braking force with extreme accuracy. No dead zones, no mechanical wear—just reliable input that remains consistent over time, whether you're fine-tuning a braking zone or slamming the pedal to avoid a collision. Fully Customizable with Moza Pit House Software Software-based adjustments let you modify force curves, feedback intensity, and input behavior without needing to swap out physical components. One-click tuning makes it easy to switch between road car, GT, or open-wheel setups in seconds. Modular Design with Multiple Setup Options This pedal integrates seamlessly with Moza’s CRP2 pedal set, allowing users to expand their setup with additional input options. Whether used as a throttle, brake, or clutch, it adapts to different racing disciplines with minimal configuration effort. Pros and Cons Pros Cons Force feedback system simulates ABS and traction loss Requires external power for force feedback Dual pressure sensors for consistent braking input PC-only, no console support One-click software adjustments for tuning pedal feel Modular compatibility with Moza CRP2 pedals Specifications Specification Value Pedal Type Throttle, Brake, or Clutch Force Feedback Motorized, telemetry-based feedback Pressure Sensors Dual 200KG sensors Maximum Detected Force 400KG Angle Sensor 15-bit high-precision Housing Material Composite Footplate Design Biomimetic curved surface Noise Level 44dB Software Moza Pit House Compatibility PC Modular Compatibility Moza CRP2 Pedals Moza mBooster Active Pedal Compatibility Compatible With Not Compatible With Moza Pit House software for customization Console platforms Moza CRP2 Pedal set Third-party pedal sets Direct PC connection MacOS Designed exclusively for PC racing setups, the mBooster integrates directly with Moza Pit House software, allowing for software-driven pedal tuning and telemetry-based force feedback adjustments. It pairs with the Moza CRP2 pedal set, making it easy to configure as a brake, throttle, or clutch depending on user preference. PC-only compatibility ensures seamless operation with Assetto Corsa, iRacing, rFactor 2, and Automobilista 2. However, console users will need to explore alternative solutions, as this system does not support Xbox or PlayStation hardware.

Read more less

The Moza SR-P Pedals offer a solid, precise feel that sim racers crave, constructed from high-strength steel to endure intense racing sessions. Whether you're a two-pedal or three-pedal driver, these pedals deliver exceptional control, thanks to features like the 100KG load cell brake sensor and an adjustable pedal surface height. The organ-type throttle pedal design ensures your foot follows a natural trajectory, making every throttle input smooth and predictable. It’s the kind of setup that gives you confidence to push harder lap after lap. What sets the Moza SR-P Pedals apart? Load Cell Braking Power A 100KG capacity load cell brake sensor elevates the Moza SR-P pedals above others in its class. This provides detailed feedback for fine-tuning braking force, giving you full control over how much pressure to apply—without worrying about squishy or inconsistent pedal feel that some cheaper alternatives suffer from. Dual Sensor Fusion Technology The combination of angle and pressure sensors for braking creates a smooth and highly controlled deceleration experience. The angle sensor governs early-stage braking, while the pressure sensor kicks in for harder braking at the end of travel. This dual-stage feedback system offers a more intuitive and layered brake response. Highly Adjustable Design Unlike some pedals that lock you into a fixed setup, the Moza SR-P pedals offer customizable pedal spacing and height adjustment. Whether you prefer pedals close together or spaced further apart for comfort, the SR-P pedals let you tailor them to your rig and driving style without compromise. Magnetic Encoder Precision Forget about the wear and tear of Hall sensors. These pedals use a 16-bit magnetic encoder with 65,536 PPR resolution. This means super accurate input readings across all three pedals, providing an ultra-smooth and linear feel that’s perfect for competitive racing. Pros and Cons Pros Cons Strong build quality with high-strength steel construction. No direct compatibility with consoles like PlayStation or Xbox. Load cell brake with up to 100KG pressure sensitivity. Limited to USB for PC connection, no wireless option. Highly adjustable pedal height and spacing for comfort. Specifications Specification Value Weight 10.3 kg Dimensions 54.6 cm x 46.4 cm x 21.2 cm Material High-strength steel / CNC Aluminum Alloy Max Range of Pressure Sensor 100KG Sensor Type (Brake) Pressure + Angle Sensor Sensor Type (Throttle & Clutch) Angle Sensor Encoder Resolution 16-bit (65536 PPR) Pedal Spacing Adjustable Pedal Surface Height Adjustable Pedal Connection Port USB Moza SR-P Pedals The Moza SR-P Pedals are designed for versatility, making them compatible with a wide range of setups. You can connect them directly to your PC via USB, ensuring a seamless integration with most sim racing rigs. The adjustable pedal spacing and height allow them to fit into both compact and more spacious cockpits. However, these pedals are designed with PC use in mind, so if you're a console racer, you may need to consider other options or additional hardware adapters. In terms of compatibility with games, the SR-P pedals work smoothly with major PC sim titles like iRacing, Assetto Corsa, and rFactor 2. Unfortunately, they are not natively compatible with consoles like PlayStation or Xbox, limiting their use to PC platforms only. For those in the sim racing community who focus on PC gaming, these pedals integrate flawlessly with a wide range of racing software.

Read more less

The Simagic P1000 Pedals are designed to give sim racers serious control over their setup. Built with an all-aluminum alloy structure, these pedals feature both a loadcell sensor and optional hydraulic system for ultimate accuracy. Whether you're looking for long pedal travel for road cars or short, responsive inputs for race cars, the Simagic P1000 Pedals adapt with adjustable stroke, spacing, and force. With over 27,000 customization options, the P1000 is all about tuning your setup to match your driving style with absolute precision. What sets the Simagic P1000 Pedals apart? Unparalleled Customization The modular design of the Simagic P1000 allows for 27,648 possible configurations, including adjustable pedal stroke, height, and resistance. Whether you prefer road cars or racing simulations, this flexibility ensures that you can dial in exactly the feel you're after. Users love how much fine-tuning is possible, even for minor adjustments. Loadcell and Hall Angle Sensors The P1000 offers both loadcell and Hall angle sensors, allowing you to switch between setups depending on your driving style. This dual-sensor capability is a standout feature, especially for those who switch between simulations and need the accuracy of a loadcell for race cars or the smoothness of Hall sensors for road cars. Optional Hydraulic System The optional P-HYS hydraulic system provides a more realistic brake feel, emulating the damping and rebound you’d experience in real cars. This adds another layer of depth to your pedal feel, especially for braking accuracy. The modularity means you can add it later, making these pedals future-proof for upgrades. Durable CNC Aluminum Build Constructed from CNC aluminum, these pedals are designed to last through over 200,000 presses without flaw. This durability, combined with the solid, sturdy design, ensures that the pedals can withstand heavy, competitive use. Feedback from users confirms their reliability, even under intense conditions. Pros and Cons Pros Cons Highly customizable with 27,000+ configuration options. Hydraulic system is an additional purchase. Loadcell and Hall sensors switchable for different setups. Initial setup may be complex for beginners. Durable all-aluminum CNC construction. Optional haptic feedback for extra immersion. Specifications Specification Value Frame Material CNC Aluminum Alloy Pedal Sensors Loadcell (100kg) & Hall Angle Sensors Resolution 12-bit (4096) Adjustable Features Travel, Spring Force, Spacing, Height, Stroke, Angle Optional Add-ons Hydraulic System, Haptic Feedback, Rubber Pads Pedal Plates Anodized Aluminum Alloy Dimensions 348 x 489.8 x 368.5mm Weight 7.6kg Connection USB (PC), Simagic Wheelbase (Can-Bus) Simagic P1000 Pedals Compatibility The Simagic P1000 Pedals connect easily via USB, making them highly compatible with PC-based racing simulators such as iRacing, Assetto Corsa, and rFactor 2. They can also be integrated with Simagic wheelbases using the CAN-Bus port. However, these pedals are not compatible with consoles like PlayStation or Xbox, making them more suited for PC setups. The modular design means they fit easily into most racing cockpits and sim rigs, as long as the proper mounting options are available. When it comes to gaming platforms, the P1000 pedals are fully compatible with PC gaming systems and work flawlessly with a variety of racing titles that support high-end hardware. While they shine on Windows-based systems, they won’t work on gaming consoles, limiting their use to sim racers who focus on PC-based simulations. With the loadcell sensor and optional hydraulic system, they offer an incredibly responsive experience for games that prioritize brake accuracy and force feedback.

Read more less

The Simagic P1000i Inverted Pedals deliver a pedal experience crafted for serious sim racers, engineered for those who want a more natural car feel. Designed for drift and precision braking, the P1000i combines CNC-machined aluminum and 100kg load cell with multiple customization options, so you can fine-tune every detail from angle to compression strength. Its unique design eliminates complex installation, and paired with Simagic’s SimPro Manager, it lets you create an impressively tailored setup without losing a moment of racing. What sets the Simagic P1000i Inverted Pedals apart? Modular, Adjustable Brake System The P1000i's brake system allows for deep customization, from stroke length to compressive strength. Users enjoy that it can adapt to different driving styles by swapping between eight rubber pads, enabling one of the most personalized braking experiences available in sim racing setups. Inverted Design for Realistic Feel Unlike most setups, these pedals feature an inverted design to simulate the feel of a real vehicle, particularly appreciated by drift enthusiasts. This setup provides a sensation of weight distribution more commonly found in road cars, making it an exciting pick for sim racers who crave that real-world driving sensation. Customizable Pedal Position and Angle The P1000i allows racers to adjust each pedal’s angle, stroke length, and even lateral positioning. For racers with specific ergonomic needs, this customization means dialing in precise configurations that fit their natural posture and foot positioning, enhancing control over long sessions. Versatile Sensor Options With a choice of load cell sensor or Hall angle sensor, racers can switch depending on the type of driving they plan to focus on. The load cell is ideal for those looking for braking strength, while the Hall angle sensor is beneficial for precision inputs, so each setup is highly adaptable. Pros and Cons Pros Cons Highly adjustable brake and pedal settings. Inverted design requires specific mounting space. Multiple sensors for customized pedal response. Not compatible with consoles without the Sigma Cortex Durable CNC-machined aluminum construction. Silent bearing structure on clutch pedal. Specifications Specification Value Product Type Inverted Pedal System Frame Material CNC-Machined Aluminum Alloy Brake Load Cell 100kg Brake Stroke Adjustment Yes Brake Compressive Strength Adjustment Yes Pedal Angle Adjustment Yes Lateral Pedal Position Adjustment Yes Pedal Configuration Options 27,648 Foot Pedal Material Anodized Aluminum Alloy Included Springs 3 for Clutch Silent Bearing Structure Included Simagic P1000i Inverted Pedals Compatibility The Simagic P1000i Inverted Pedals integrate best with Simagic wheelbases and setups, giving full functionality with the SimPro Manager software for seamless adjustment. These pedals connect directly via USB to a PC, allowing for a straightforward installation and ensuring compatibility with leading sim setups that support USB peripherals. However, these pedals are limited in compatibility with consoles, focusing solely on a PC experience, which is ideal for sim racing enthusiasts aiming for a tailored PC setup. When it comes to game compatibility, the P1000i pedals work with a wide array of PC racing titles, including Assetto Corsa, iRacing, and rFactor 2, bringing adjustable pedal sensitivity and customization to the forefront of these gaming platforms. While not compatible with consoles without the Sigma Cortex, these pedals ensure a consistent, professional connection and performance for most leading PC racing sims.

Read more less

The Simagic P1000i-RS Hydraulic Inverted Pedals offer an incredibly refined design for sim racers, focusing on modularity and advanced hydraulics. Built with a CNC-machined aluminum frame, the P1000i-RS pairs robust durability with the adaptability sim racers crave. It’s equipped with a P-HYS hydraulic brake system and the optional P-HPR Haptic Pedal Reactor for an authentic vehicle feedback experience, while easy angle, travel, and strength adjustments allow a personalized setup tailored to the racer's needs—all within a sleek, inverted pedal package. What sets the Simagic P1000i-RS Hydraulic Inverted Pedals apart? Hydraulic Brake System with Adjustable Damping The P-HYS hydraulic brake system delivers fluid resistance that closely mimics real-world braking, providing a more natural deceleration feel. Combined with adjustable damping and rebound, this pedal set offers a level of control not found in simpler mechanical setups, enhancing the simulation experience for dedicated sim racers. Optional Haptic Feedback Motor The P1000i-RS offers the unique option of the P-HPR Haptic Pedal Reactor, a feature that adds tactile feedback tuned to in-game telemetry. This gives drivers a more tactile connection with the virtual road, enabling adjustments to vibration frequency and amplitude that simulate vehicle dynamics, making for a highly engaging experience. Quick Installation and Modular Adjustability These pedals come with a modular installation plate and wiring box that simplify mounting and profile setup, a convenience not typically seen in comparable pedal systems. With the pedal angle, travel, and even lateral spacing all customizable, it’s easy to adjust for comfort and fit, enhancing both performance and ease of use. Durable CNC Aluminum Construction The all-aluminum structure, meticulously crafted through CNC machining, has been tested to withstand over 200,000 stomps without structural issues. This robust construction ensures the pedals hold up under high-use conditions, making them a favorite for racers looking for a setup that lasts. Pros and Cons Pros Cons Hydraulic brake system with adjustable damping. Not console compatible. Optional haptic feedback for immersive experience. Relatively high price for the set. Modular, simplified installation process. May require additional mounting hardware. Durable aluminum construction for longevity. Heavy unit, may need solid rig setup. Specifications Specification Value Model Simagic P1000i-RS Hydraulic Inverted Pedals Package Dimensions 35.00cm x 50.00cm x 38.00cm Weight 7.60kg Resolution 12Bits (4096) USB Connection PC, Simagic Wheelbase (Can-Bus Port) Hydraulic Brake Cylinder Included Haptic Pedal Reactor Supported (optional) Adjustable Travel Supported Adjustable Spring Force Level Supported Angle/Position Adjustment Supported Pedal Plates Anodized Aluminum Alloy Pedal Control Box Included Building Material CNC Aluminum Alloy Dimensions 348 x 489.8 x 368.5mm Simagic P1000i-RS Hydraulic Inverted Pedals Compatibility The Simagic P1000i-RS Hydraulic Inverted Pedals are fully compatible with PC setups, connecting directly via USB or through the Simagic wheelbase. These pedals also pair well with Simagic’s own line of wheelbases and mounts, ensuring ease of integration for those using Simagic gear. Notably, this pedal system is designed with PC platforms in mind, meaning it does not support console setups, focusing instead on the flexibility that PC gaming offers. In terms of gaming titles, these pedals perform exceptionally well with popular PC racing sims like Assetto Corsa, iRacing, and rFactor 2. With Simagic's software allowing for adjustments to brake force, pedal travel, and telemetry-based haptics, they are tuned to enhance each game’s feedback. Console users may be disappointed by the lack of compatibility, as these pedals are specifically built with the PC sim racer in mind.

Read more less

The Simagic P2000-S100 Pedals are designed for sim racers who want the feel of hydraulic power at their feet. Constructed from CNC machined aluminum, this pedal set integrates a load cell sensor and custom hydraulic brake system rated up to 200 kg, putting real muscle into braking. With fine-tuning options on pedal angle, position, and even clutch friction, the P2000-S100 offers control over every detail, giving serious racers a setup that pushes driving consistency to a whole new level. What sets the Simagic P2000-S100 Pedals apart? Custom Hydraulic Brake System Equipped with a fully hydraulic brake, the P2000-S100 mirrors real car brake resistance, pushing up to 200 kg with customizable stiffness. This brake design, alongside a load cell sensor, gives racers powerful, reliable braking feedback, ideal for those demanding accuracy and feel under braking pressure. Durable CNC Machined Aluminum Build Every component on the P2000-S100 is CNC machined from aluminum, giving it a rugged construction that sim racers often seek for durability. This design not only withstands heavy use but also minimizes flexing, allowing for more consistent pedal feedback over time—a huge plus for competitive racers. Extensive Adjustment and Customization Options Adjustability is key with the P2000-S100, which offers pedal height, angle, and stiffness adjustments for a custom setup that suits any racer’s preference. The clutch system’s Belleville spring stack simulates a clutch friction point, adding an additional layer of realism often missing from pedal systems. Plug-and-Play USB Compatibility No complex setups here—the P2000-S100 is ready to go right out of the box with simple USB plug-and-play functionality, which works seamlessly with Simagic’s configuration software. It’s made with PC users in mind, eliminating compatibility issues and making setup straightforward for any PC-based sim racer. Pros and Cons Pros Cons Hydraulic brake with customizable stiffness. May require additional mounting hardware. Durable CNC machined aluminum construction. Heavy unit, requires stable mounting. Adjustable clutch friction point simulation. Plug-and-play setup with Simagic software. Specifications Specification Value Model Simagic P2000-S100 3 Pedals Package Dimensions 47.00cm x 40.00cm x 20.00cm Weight 9.00kg Hydraulic System Hydraulic brake with adjustable clutch Brake Pressure 200 kg (adjustable) Pedal Position/Angle Adjustment Supported Material CNC machined aluminum Connection Type USB, plug-and-play Load Cell 100 kg (200 kg optional) Included Accessories Hard/soft spring kit, base plate Platform Compatibility PC only Simagic P2000-S100 Pedals Compatibility The Simagic P2000-S100 Pedals are fully compatible with PC platforms via USB and are designed specifically for PC-based sim racing setups. These pedals plug and play easily with Simagic’s configuration software, allowing for a straightforward connection. While ideal for those using PC-based rigs, the P2000-S100 does not support console setups, which keeps it focused solely on the PC sim racing community. For in-game compatibility, these pedals are versatile across popular PC racing titles like Assetto Corsa Competizione, iRacing, and rFactor 2. With Simagic’s software, racers can adjust force levels, brake pressure, and even clutch friction points. Console racers, however, may be disappointed as these pedals are crafted with PC racers in mind, leaving consoles unsupported.

Read more less

The Simagic P2000-S100RF Pedals bring a focused two-pedal setup that packs serious technology and tactile feedback. Built with CNC machined aluminum and incorporating a hydraulic master and slave cylinder, these pedals offer a unique edge with a load cell rated to 100 kg, upgradeable to 200 kg for even more control. With adjustability in position and angle, and an exceptionally durable build, the P2000-S100RF pedals give drivers a braking experience designed to perform lap after lap without losing their edge. What sets the Simagic P2000-S100RF Pedals apart? Hydraulic Brake System with High Load Capacity The hydraulic brake setup on the P2000-S100RF provides a brake force adjustable up to 200 kg, replicating high-force braking systems seen in racing setups. This setup supports racers who want fine-tuned control under pressure and need a brake pedal that can meet the demands of intense sim sessions. Rigidity of CNC Machined Aluminum Construction Designed from CNC machined aluminum, the P2000-S100RF pedals boast structural stability that stands up to heavy footwork and doesn’t flex under pressure. This rigid construction means drivers get a consistent feedback feel that holds up over extended use—essential for racers focusing on performance consistency. Load Cell for Precise Input The load cell integrated into these pedals offers fine-grain braking control, letting drivers make micro-adjustments that reflect instantly in their simulator. This type of sensor setup provides more nuanced braking feedback, helping racers shave down times with a setup that rewards controlled, precise input. Plug-and-Play USB Setup No complicated configuration here—the P2000-S100RF pedals are ready to go right out of the box with straightforward USB connectivity. With a setup built for the Simagic software suite, these pedals eliminate the usual driver complications and allow for hassle-free, configurable sim racing. Pros and Cons Pros Cons Durable CNC aluminum construction. Not compatible with console setups without the Sigma Cortex Adjustable brake load up to 200 kg. Higher-end price point. Plug-and-play USB connection. No dedicated clutch pedal. Includes base plate for stability. Specifications Specification Value Model Simagic P2000-S100RF 2 Pedals Package Dimensions 47.00cm x 40.00cm x 20.00cm Weight 7.00kg Brake Pressure 200 kg (adjustable) Load Cell 100 kg (200 kg optional) Material CNC machined aluminum Connection Type USB, plug-and-play Base Plate Included Platform Compatibility PC only Simagic P2000-S100RF Pedals Compatibility The Simagic P2000-S100RF Pedals are designed specifically for PC platforms and connect via USB, offering straightforward plug-and-play capability. With USB functionality and Simagic’s configuration software, these pedals are ready to work with most PC-based sim racing rigs right out of the box. However, the P2000-S100RF lacks compatibility with console systems, as it’s focused solely on providing an optimized experience for PC racers. In terms of in-game compatibility, these pedals are ideal for widely-used PC sim titles like Assetto Corsa Competizione, iRacing, and rFactor 2. Integrated with Simagic’s software, drivers have access to easy-to-use adjustment options for force and load levels. Gamers who primarily race on consoles, however, will find these pedals unsupported on console games, keeping the P2000-S100RF focused solely on PC-based racing setups. With the Sigma Cortex you can convert the pedals to PS5.

Read more less

The Simagic P2000-S200 Pedals are built to give sim racers a level of control that truly stands out. Engineered with hydraulic clutch and brake systems, this three-pedal setup brings remarkable balance to throttle, brake, and clutch input. Designed with CNC-machined aluminum for structural integrity and equipped with a 200 kg load cell for the brake, these pedals handle high-stress racing sessions while providing a precise, reliable feel underfoot. With thoughtful adjustability in pedal angle and position, they give drivers a pedalboard that’s as adaptable as it is durable. What sets the Simagic P2000-S200 Pedals apart? Hydraulic Clutch with Friction Point Simulation One of the most unique elements of the P2000-S200 pedals is the hydraulic clutch that includes a friction point simulation using a Belleville spring stack. This gives drivers a defined, consistent clutch bite point, adding realism and allowing for smoother gear transitions and a more accurate feel in tight race conditions. Adjustable Load Cell with High Brake Pressure The P2000-S200 pedals feature a 200 kg-rated load cell for the brake pedal, which supports high-force braking without pedal fade. This setup is perfect for racers who want to fine-tune their brake force levels to match the demands of their setup, giving an experience that closely replicates real-life brake pressure dynamics. Customizable Pedal Position and Angle These pedals come with flexibility in positioning and angle, giving drivers the freedom to adjust each pedal for a tailored fit. Whether set up for a road or rally position, this adjustability gives sim racers the chance to create a layout that complements their specific racing needs and preferences. Built for Heavier Use and Durability Constructed from CNC-machined aluminum, the P2000-S200 pedals hold up to aggressive usage with minimal wear. This solid construction makes them a long-term choice for racers who need equipment that can endure frequent and intense use without compromising on the pedal’s feedback or feel. Pros and Cons Pros Cons Includes hydraulic clutch with friction point simulation. Priced at a premium level. Highly adjustable pedal positioning and angles. PC-only compatibility. 200 kg load cell supports high brake pressure. Does not support console platforms. Durable, CNC-machined aluminum build. Heavy design may require extra mounting. Specifications Specification Value Model Simagic P2000-S200 3 Pedals Package Dimensions 47.00cm x 40.00cm x 20.00cm Weight 9.00kg Brake Pressure 200 kg (adjustable) Load Cell 200 kg Material CNC machined aluminum Clutch Friction Point Belleville spring stack simulation Connection Type USB, plug-and-play Base Plate Included Platform Compatibility PC only Simagic P2000-S200 Pedals Compatibility The Simagic P2000-S200 Pedals are built specifically for PC platforms, connecting through a plug-and-play USB setup, so sim racers get an easy and fast configuration on PC rigs. Integrated with Simagic’s configuration software, these pedals offer extensive options for customizing feedback and force settings, which allows them to fit well with a variety of setups. However, these pedals are not compatible with console setups, so they’re geared entirely toward PC racers. In terms of in-game compatibility, the P2000-S200 pedals work exceptionally well with popular PC-based sim titles like Assetto Corsa Competizione, iRacing, and rFactor 2. Through the Simagic software, drivers can fine-tune settings to match the specific physics engine of each title, which is crucial for sim racers who need precise pedal tuning. Console users, though, should note these pedals aren’t supported on any console platforms, making them optimal for PC use only.

Read more less