Conspit CX295 Steering Wheel Rim is built for sim racers who want a tight, focused grip and clear hand positioning, especially in fast cars with quick transitions. With a 295mm C-shape profile, it offers just the right amount of clearance while keeping hand placement locked in lap after lap. Wrapped in durable synthetic leather with perforated grip zones and topped off with a blue stitching and marker combo, it blends utility with a sharp visual edge. Compact without feeling cramped—this rim was made for purpose. What Sets the Conspit CX295 Steering Wheel Rim apart? C-Shape Ergonomics for Fast Input Work The 295mm C-shape gives you more hand clearance on the lower half of the rim, especially useful in rigs with tighter seating positions. It also means you’re not dragging your knuckles on knees or bumping into your seat under rotation. Racers who switch between GT and formula-style cars say the CX295 feels natural in both cases, offering better wrist angles without going fully flat-bottom. Purposeful Diameter for Compact Control At 295mm, this rim sits in a sweet spot—not too big to be unwieldy, not so small that it loses leverage. This size lends itself well to quick steering corrections and mid-corner inputs in faster vehicles. Racers moving from larger rims often notice how the smaller footprint helps sharpen their hand movements while keeping force feedback strong and direct through their base. Consistent Feel with Perforated Grip Zones The single-piece leather wrap with strategically perforated zones delivers a tactile feel that holds up even in long sessions. It doesn’t shift or soften up after repeated use, and the grip stays consistent even with gloves or sweaty palms. Feedback often mentions how the leather feels immediately “settled”—no break-in time needed, no need for aftermarket tape or gloves to fix grip issues. Plug-and-Play Setup With Visual Flair Like other rims in the H.AO family, the CX295 ships with mounting hardware and a USB cable, so you're not chasing down extra parts just to bolt it up. The blue stitching, marker, and Conspit logo give it a sharp, cohesive look—especially if you’re already running other Conspit modules. Setup is fast, and compatibility with the H.AO hub ensures you’re up and running with minimal effort. Pros and Cons Pros Cons Compact 295mm C-shape ideal for tight rigs No integrated buttons or input controls Perforated grip zones enhance control consistency Designed primarily for Conspit H.AO compatibility Includes USB cable and mounting hardware Visually matches Conspit ecosystem Specifications Specification Value Product Name Conspit CX295 Diameter 295mm Shape C-shaped Grip Material High-quality synthetic leather Grip Features Perforated zones, blue stitching, blue center marker Finish Black base plate with central white logo Included Items CX295 rim, USB cable, mounting hardware Conspit CX295 Steering Wheel Rim Compatibility Component Compatible? Conspit H.AO Hub Yes Standard 70mm PCD Mounting Pattern Yes Simucube, VRS, Moza Wheelbases Yes (with compatible hub) Console Platforms (PlayStation, Xbox) No The Conspit CX295 Steering Wheel Rim is built with standard 70mm PCD mounting, making it compatible with a wide range of direct drive systems when used with the appropriate hub. It’s designed to integrate seamlessly with the Conspit H.AO Hub, providing a clean fit and finish with no guesswork on compatibility. It ships with mounting hardware and a USB cable, making the installation process quick and straightforward for most PC-based sim setups. This rim is intended for PC sim racing only and does not work with PlayStation or Xbox consoles. As with other passive rims, there are no built-in controls, so it depends on your hub or button box for in-game input. The CX295 performs best in setups running popular titles like iRacing, ACC, and rFactor 2, where quick transitions and tight cornering benefit from its compact C-shape and tactile leather wrap.

Read more less

Conspit DX320 Steering Wheel Rim brings a sharp, focused feel to your sim rig, whether you're slicing through tight corners or managing traction on corner exit. With a 320mm D-shaped profile wrapped in a seamless piece of synthetic leather, it balances comfort with control, and feels great in hand even during long sessions. The blue stitching and top marker give it that subtle motorsport flair, while the perforated grip zones offer extra bite when things heat up mid-stint. What Sets the Conspit DX320 Steering Wheel Rim apart? Single-Piece Leather Wrap with Perforated Grip Zones Unlike rims that use segmented wraps or foam overlays, the DX320 features a continuous leather cover that reduces weak points and improves durability over time. The perforated grip zones aren’t just a styling choice—they help wick moisture and give you a bit more grip under sweaty conditions or during endurance stints. Users consistently note how “planted” the wheel feels, especially during high-torque output moments where feedback matters. D-Shaped Profile with a Balanced Diameter The 320mm diameter combined with the D-shape makes this rim feel versatile for both GT and open-wheel applications. It’s wide enough for leverage in heavier cars but compact enough to keep your hands clear in tighter cockpits. The flat bottom is also appreciated by racers with lower seating positions, giving extra thigh clearance and avoiding that steering-in-the-lap feel. Motorsport-Inspired Styling with Subtle Details The blue stitching, center marker, and sleek black finish give it a purposeful look that doesn’t scream for attention but still feels tailored for racing. The center logo and clean backplate match the rest of the H.AO series lineup, so if you're running other Conspit gear, it ties the whole rig together visually without clashing or looking like an afterthought. Mounting Simplicity with Included Hardware You won’t be hunting for screws or sourcing cables—the DX320 ships with the mounting hardware and USB cable you’ll need for most standard wheelbase connections. Feedback from sim racers highlights how easy it is to install, especially for anyone looking to upgrade from a basic round rim to something that offers a little more feel and form without a full-button interface attached. Pros and Cons Pros Cons Comfortable 320mm D-shape suits various driving styles No built-in buttons or encoders One-piece synthetic leather wrap adds durability Limited adjustability compared to full wheel units Perforated grip zones improve control during long races Ships with mounting hardware and USB cable Specifications Specification Value Product Name Conspit DX320 Diameter 320mm Shape D-shaped Grip Material High-quality synthetic leather Grip Features Perforated inner zones, blue stitching, blue center marker Base Finish Black with central white logo Included Items DX320 rim, USB cable, mounting hardware Conspit DX320 Steering Wheel Rim Compatibility Component Compatible? Conspit H.AO Hub Yes Conspit Button Modules (H.AO Series) Yes Standard 70mm PCD Mounting Pattern Yes Fanatec Wheelbases Yes (with adapter) Simucube, VRS, Moza Bases Yes (with appropriate hubs) Console Platforms (PlayStation, Xbox) No The Conspit DX320 Steering Wheel Rim is fully compatible with Conspit’s H.AO Hub and other Conspit control modules, making it an easy drop-in for anyone already using the brand’s modular system. It follows a standard 70mm PCD mounting pattern, which means it will also work with most major direct drive wheelbases like Simucube, Moza, or Fanatec when used with the correct adapter or hub. The USB cable and mounting hardware included in the kit simplify setup for DIY and prebuilt rigs alike. This rim is intended for PC-based sim racing only and does not offer native compatibility with PlayStation or Xbox. Since there are no electronics or input buttons built into the rim itself, it relies entirely on whatever hub or button box you pair it with to communicate with games. It performs well across platforms like iRacing, Assetto Corsa, ACC, and rFactor 2 when used in a complete PC setup with a recognized USB controller interface.

Read more less

Conspit RX320 Steering Wheel Rim delivers a well-balanced, no-nonsense feel that’s easy to love whether you’re hot-lapping in a GT car or wrestling something more lively. With a 320mm round profile and a single-piece synthetic leather wrap, it feels composed in your hands and holds up to long sessions without fuss. Perforated grip zones keep things grippy under pressure, and the blue stitching and center marker give it just enough flair to remind you it’s here to get the job done. What Sets the Conspit RX320 Steering Wheel Rim apart? Full-Circle Design With Consistent Leverage The round 320mm shape gives a symmetrical feel that many sim racers prefer for endurance and multi-discipline racing. Unlike flat-bottomed rims, you get uninterrupted hand rotation—especially handy for rally or vintage cars where you might be feeding the wheel more. The diameter strikes a nice middle ground: not too wide for quick transitions, not too small to compromise leverage. One-Piece Synthetic Leather for Clean Looks and Comfort Some wheels suffer from loose seams or inconsistent padding, but the RX320’s single-piece wrap gives it a tidy, uniform finish. It doesn’t pinch or wrinkle, even under pressure, and the perforated inner grip zones help airflow during extended sessions. Drivers have noted how it feels “ready out of the box,” with no break-in period needed to get comfortable with the texture or grip. Visual Consistency With the H.AO Series The RX320 fits seamlessly into the Conspit H.AO ecosystem. Its blue stitching and top marker mirror other components in the series, offering visual continuity across your setup. This might seem minor, but when you're building a clean rig with matching parts, it’s nice not to have one odd wheel throwing off the look. The central white logo and matte black finish round out the purposeful design. Quick Setup With All Hardware Included Nothing’s worse than getting a new rim and realizing you’re short a bolt or missing a cable. The RX320 includes mounting hardware and a USB cable, which saves time and headaches. It works with the H.AO hub and other standard setups without needing custom brackets or third-party adapters. That simplicity gets mentioned often—especially by sim racers who like to swap rims based on car type. Pros and Cons Pros Cons Round 320mm profile supports smooth wheel rotation No integrated buttons or encoders Single-piece leather wrap is smooth and durable Designed primarily for H.AO hub ecosystem Perforated grip zones aid during longer sessions Includes mounting hardware and USB cable Specifications Specification Value Product Name Conspit RX320 Diameter 320mm Shape Round Grip Material High-quality synthetic leather Grip Features Perforated inner zones, blue stitching, blue center marker Finish Black base with central white Conspit logo Included Items RX320 rim, USB cable, mounting hardware Conspit RX320 Steering Wheel Rim Compatibility Component Compatible? Conspit H.AO Hub Yes Standard 70mm PCD Mounting Pattern Yes Simucube, VRS, Moza Bases Yes (with proper hub or adapter) Console Platforms No The Conspit RX320 Steering Wheel Rim uses a standard 70mm PCD mounting pattern, making it compatible with most direct drive systems on the market, especially when paired with the Conspit H.AO hub. If you're using a Simucube, Moza, VRS, or similar platform, this rim will bolt up cleanly with the right adapter or hub. It also includes the necessary USB cable and mounting hardware, streamlining the setup process for PC-based sim racers. Like many rims in this class, the RX320 is designed for PC use only and does not support PlayStation or Xbox consoles. Because it lacks onboard electronics or inputs, it functions as a passive steering rim and relies on external button modules or hubs for signal communication. For sim racers running platforms like iRacing, Assetto Corsa, ACC, or rFactor 2, it fits easily into a modular rig built around direct drive performance and tactile feedback.

Read more less

The Moza ES Formula Wheel Mod is a sleek and functional upgrade designed for sim racers who crave a streamlined, formula-style driving experience. Crafted from a 4 mm aerospace-grade aluminum plate, this mod transforms the Moza ES wheel into a compact, purpose-built formula racing wheel. The grip, made from environmentally friendly TPU rubber, ensures a firm hold even during the most intense races. With its quick-change system, switching between GT and formula setups is effortless, allowing for greater versatility. At 280 mm in diameter, it mirrors the size of real-world formula wheels, enhancing control without sacrificing comfort. What Sets the Moza ES Formula Wheel Mod apart? True Formula-Style Dimensions The 280 mm width isn’t just a number—it’s what professional open-wheel racers use. The ergonomics bring precise control and reduced hand movement, making it ideal for rapid steering inputs and maintaining consistency through tight chicanes. Effortless Swaps with Quick-Change System Thanks to Moza’s aluminum quick-release mechanism, swapping between different wheels is seamless. Whether transitioning from a GT-style setup to a formula racing layout, the change happens in seconds without tools or unnecessary hassle. Durable Yet Lightweight Construction The 4 mm aerospace-grade aluminum plate ensures rigidity without adding unnecessary weight. Unlike bulkier alternatives, this design maintains a responsive steering feel while offering longevity that stands up to aggressive use. Enhanced Grip for Intense Sessions The injection-molded TPU rubber grips are built for extended races. They resist sweat buildup and provide a secure, non-slip hold, meaning you won’t lose control when it matters most, even in the longest endurance events. Pros and Cons Pros Cons True-to-life 280 mm width for formula-style handling Limited to Moza ES steering wheel compatibility Quick-change system allows for seamless wheel swaps Lacks extra buttons or paddles for added controls Durable aluminum plate adds strength without extra weight Sweat-resistant TPU grips maintain comfort in long sessions Specifications Specification Value Product Name Moza ES Formula Wheel Mod Material Aluminum, TPU Weight 0.5 kg Dimensions 18 cm × 32 cm × 0.5 cm Wheel Diameter 280 mm Compatibility Moza ES Steering Wheel Quick-Change System Yes Grip Material Injection-molded TPU rubber Package Contents Moza Formula ES Wheel Rim, mounting material, accessories Moza ES Formula Wheel Mod Compatibility The Moza ES Formula Wheel Mod is designed exclusively for the Moza ES Steering Wheel, making it a seamless swap for those already using Moza’s ecosystem. The quick-change system ensures that switching between a GT and formula-style setup is hassle-free, but it is not directly compatible with other brands or universal hubs. When it comes to platforms, the Moza ES Steering Wheel (and by extension, this mod) is compatible with PC-based racing simulators that support Moza’s ecosystem. However, as Moza's wheelbases have limited direct console support, it’s important to check for specific game and hardware compatibility before purchasing. Titles like iRacing, Assetto Corsa, and rFactor 2 fully support Moza hardware, but console racers may need additional adapters or alternative setups.

Read more less